Recovery of Used Lubricating Oils - A Brief Review
Progress in Petrochemical Science · 2018
DOI: 10.31031/pps.2018.01.000516 ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Petrochemical Science, 2018. Verfasst von José Carlos Oliveira Santos. Die Arbeit wurde bisher 8-mal zitiert (Crossref).
Abstract (Originalsprache)
Synthetic or non-synthetic lubricating oils are petroleum derivatives, used for automotive or industrial purposes, which after the recommended period of use recommended by the equipment manufacturers deteriorate in part, forming oxygenated compounds (organic acids and ketones), polynuclear aromatic compounds of high viscosity (and potentially carcinogenic), resins and lacquers [1]. In addition to the basic oil degradation products, there are present in the used oil the additives which have been added in the process of formulating these lubricants and which have not yet been consumed, wear metals of lubricated engines and engines and various contaminants such as water, fuel, dust and other impurities. The lubricating oil used may still contain chemicals which are sometimes unscrupulously added to the oil and its characteristic contaminants [2]. In this way, when waste oils are released directly into the environment (in water, sewage and soil networks) or when uncontrolled burning, they cause serious soil, water and air pollution problems. When released into the soil, the waste oils seep into the ground with the rainwater contaminating the soil they pass through, and when they reach underground groundwater, they also pollute the water from fountains and wells [3,4]. When discharged into wastewater drainage systems, they pollute water receiving facilities and also cause significant damage to wastewater treatment plants. The used oil contains high levels of hydrocarbons and metals [4], being the most representative iron, lead, zinc, copper, chromium, nickel and cadmium. The indiscriminate burning of the lubricating oil used, without prior treatment of demetallation, generates significant emissions of metallic oxides in addition to other toxic gases, such as dioxins and sulfur oxides. Lubricating oils are among the few petroleum derivatives that are not fully consumed during use. Manufacturers of additives and formulators of this type of oil have been working on the development of products with longer life, which tends to reduce the production of waste oils. However, with the increase in additivation and the useful life of the oil, the difficulties in the regeneration process of the basic oil after use increase. On the other hand, if we look at the dangers that used oil can cause to the environment, a solution to the difficulties encountered would be easily justified. In addition, re-refining restores the conditions of the basic lubricating oil, whose quality is as good, as or even better than the basics of first refining. The refined oils would return to the market, generating jobs, saving foreign exchange and avoiding the increase of environmental pollution [5]. The introduction of the additives to the lubricants is intended to add to these important characteristics, such as dispersion or dispersivity, detergency inhibitor, antiwear, antioxidant, anticorrosive, antifoam, viscosity modifying, emulsifying, lowering pour point, tackiness etc. The amount of additives recommended by suppliers varies, on average, from 0.5 to 28% by volume. To formulate these additives, various chemicals are added to the base oil for the lubricant to perform well. In addition, the lubricating oil carries all kinds of impurities generated by the wear of the internal components. In this way, it is necessary to monitor the physicochemical properties of the lubricants used to determine the appropriate time to change them. Motor wear can be monitored through this characterization in waste oils. To achieve these goals, some techniques have been widely used to characterize lubricating oils and also in other petroleum derivatives [3,6,7]. Mini Review
Zitieren
APA
Santos, J. C. O. (2018). Recovery of Used Lubricating Oils - A Brief Review. Progress in Petrochemical Science. https://doi.org/10.31031/pps.2018.01.000516
Vancouver
Santos JCO. Recovery of Used Lubricating Oils - A Brief Review. Progress in Petrochemical Science. 2018. doi:10.31031/pps.2018.01.000516
BibTeX
@article{Santos2018,
author = {Santos, José Carlos Oliveira},
title = {Recovery of Used Lubricating Oils - A Brief Review},
journal = {Progress in Petrochemical Science},
year = {2018},
doi = {10.31031/pps.2018.01.000516}
}
EUVIMED