Influence of the Filling Oil Compounds and Additives on the Thermal Stability of Insoluble Sulfur
Progress in Petrochemical Science · 2018
DOI: 10.31031/pps.2018.01.000515 ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Petrochemical Science, 2018. Verfasst von Wang Yan Zhen.
Abstract (Originalsprache)
Insoluble sulfur (IS) is a type of sulfur polymer, which is insoluble in CS2 and is a good rubber vulcanizing agent [1-4]. There are two types of IS, oil-filled and non-oil-filled. Because non-oilfilled IS is a powder, it is not convenient for use and transport. In contrast, oil-filled IS can be dispersed evenly and be widely used. Therefore, IS should be treated with oil [5,6]. The production of IS usually adopts a high temperature method, which causes the liquid or gas sulfur to spray into cold liquids to obtain IS with a concentration of 30-60wt%. To obtain high concentrations of IS, solvent has been used to extract the soluble sulfur, followed by filling with oil to obtain oil-filled IS [2,7-11].
Zitieren
APA
Zhen, W. Y. (2018). Influence of the Filling Oil Compounds and Additives on the Thermal Stability of Insoluble Sulfur. Progress in Petrochemical Science. https://doi.org/10.31031/pps.2018.01.000515
Vancouver
Zhen WY. Influence of the Filling Oil Compounds and Additives on the Thermal Stability of Insoluble Sulfur. Progress in Petrochemical Science. 2018. doi:10.31031/pps.2018.01.000515
BibTeX
@article{Zhen2018,
author = {Zhen, Wang Yan},
title = {Influence of the Filling Oil Compounds and Additives on the Thermal Stability of Insoluble Sulfur},
journal = {Progress in Petrochemical Science},
year = {2018},
doi = {10.31031/pps.2018.01.000515}
}
EUVIMED