EUVIMEDEUVIMED entdecken
Crossref

Geotechnical, Chemical and Structural Characterization of Waste Clay from Boron Production

Derya Ulutas, Eren Bayrakci, Zerrin Cokaygil, Aysun Ozkan, Yucel Guney, Mufide Banar

Athens Journal of Τechnology & Engineering · 2014

DOI: 10.30958/ajte.1-3-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Athens Journal of Τechnology & Engineering, 2014. Verfasst von Derya Ulutas und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Turkey has 72% of the world boron reserves and takes first place with a reserve of 1.8 million tons. Each year, 900,000 tons of waste clay results from boron production. For this reason, there is a growing interest to develop novel products based on this kind of waste. In this study, geotechnical, chemical and structural characterization of waste clay from boron enterprises was performed to investigate the potential use in landfills. For this purpose, waste clay was obtained from Eskisehir Kirka Boron Works and it was characterized by using geotechnical (water content, specific weight, liquid limit, plastic limit, standard proctor compaction test, unconfined compressive strength tests, sieve analysis, hydrometer test, hydraulic conductivity), chemical and structural (cation exchange capacity (CEC), XRD, XRF, ICP-MS, SEM, FT-IR, BET) analyses. According to the results, the waste clay had a water content of 39.2% and a specific weight of 2.77 g/cm 3 . According to liquid limit (58%) and plastic limit (30%) values, plasticity index was calculated as to be 28%. The standard proctor compaction test showed that the most effective compression ratio was obtained at the optimum water content of 33%. The unconfined compressive strength was 2.16 kg/cm 2 , the swelling potential was 10.4% and the permeability constant was obtained as 3.5×10 -11 m/s at 33% water content. Soil classification was determined as to be high-plasticity clay (CH) according to the results of sieve analysis, hydrometer test, liquid and plastic limit tests. CEC of the clay was

Zitieren

APA

Ulutas, D., Bayrakci, E., Cokaygil, Z., Ozkan, A., Guney, Y., & Banar, M. (2014). Geotechnical, Chemical and Structural Characterization of Waste Clay from Boron Production. Athens Journal of Τechnology & Engineering. https://doi.org/10.30958/ajte.1-3-1

Vancouver

Ulutas D, Bayrakci E, Cokaygil Z, Ozkan A, Guney Y, Banar M. Geotechnical, Chemical and Structural Characterization of Waste Clay from Boron Production. Athens Journal of Τechnology & Engineering. 2014. doi:10.30958/ajte.1-3-1

BibTeX
@article{Ulutas2014,
  author = {Ulutas, Derya and Bayrakci, Eren and Cokaygil, Zerrin and Ozkan, Aysun and Guney, Yucel and Banar, Mufide},
  title = {Geotechnical, Chemical and Structural Characterization of Waste Clay from Boron Production},
  journal = {Athens Journal of Τechnology & Engineering},
  year = {2014},
  doi = {10.30958/ajte.1-3-1}
}
Kostenlos starten →