Use of Polymer Fiber to Improve Resistance to Rutting and Stripping for HMA with RAP
Athens Journal of Sciences · 08.06.2026 · 13 (2) · 99-110
DOI: 10.30958/ajs.13-2-1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Athens Journal of Sciences, online erschienen am 08.06.2026. Verfasst von Hani Alzeraie und 4 weiteren Autor:innen.
Abstract (Originalsprache)
A great percentage of highways and roads in California are constructed with Hot Mix Asphalt (HMA) and, as California infrastructure ages, these highways and roads must be maintained and rehabilitated. Reclaimed Asphalt Pavement (RAP) is considered an excellent alternative to virgin (raw, unprocessed) materials because it reduces the use of virgin aggregate and binder. Also, the use of RAP decreases the amount of construction waste placed into landfills. This laboratory study investigated the effect of two different polymer fibers on the mechanical properties of HMA with RAP. Three different HMA with RAP mixes were used in the study. One mix that is commonly utilized on the Central Coast of California contained 15% RAP while the second and third mixes contained 25% and 40% RAP. Three different fiber dosages (0.05%, 0.10% and 0.15% of the total mix) were investigated. Specimens were prepared and tested for rutting and moisture sensitivity using Hamburg Wheel Tracker (HWT). Test results showed that adding fibers improved resistance to rutting for mixes with RAP content higher than 25%. Also, adding fibers improved mixes resistance to moisture damage. In addition, one of the two fibers used in the study outperformed the other. Overall, results indicate that adding polymer fibers to HMA mixes containing RAP has the potential to improve mixes resistance to rutting and moisture damage depending on fiber dosage and type. This study offers information valuable to the maintenance and rehabilitation of roads and highways. Keywords: Polymer Fiber, HMA, Rutting Resistance, High RAP, Stripping
Zitieren
APA
Alzeraie, H., Rahim, A., Saadeh,, S., Plager, C., & Ojha, A. (2026). Use of Polymer Fiber to Improve Resistance to Rutting and Stripping for HMA with RAP. Athens Journal of Sciences, 13(2), 99-110. https://doi.org/10.30958/ajs.13-2-1
Vancouver
Alzeraie H, Rahim A, Saadeh, S, Plager C, Ojha A. Use of Polymer Fiber to Improve Resistance to Rutting and Stripping for HMA with RAP. Athens Journal of Sciences. 2026;13(2):99-110. doi:10.30958/ajs.13-2-1
BibTeX
@article{Alzeraie2026,
author = {Alzeraie, Hani and Rahim, Ashraf and Saadeh,, Shadi and Plager, Chase and Ojha, Aaditya},
title = {Use of Polymer Fiber to Improve Resistance to Rutting and Stripping for HMA with RAP},
journal = {Athens Journal of Sciences},
year = {2026},
volume = {13},
number = {2},
pages = {99--110},
doi = {10.30958/ajs.13-2-1}
}
EUVIMED