EUVIMEDEUVIMED entdecken
Crossref

Development of Light-Weight, Eco-Friendly E-Waste Plastic and Glass Fibre Reinforced Gypsum Composites for Sustainable Building Applications

Abdul-Qudus Olajide Akindele, Modupe A. Onitiri, Praise Adeola Ogunniyi

Journal of Sustainable Materials Processing and Management · 13.10.2026 · 6 (2)

DOI: 10.30880/jsmpm.2026.06.02.005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Sustainable Materials Processing and Management, online erschienen am 13.10.2026. Verfasst von Abdul-Qudus Olajide Akindele und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to the growing problems with electronic waste (e-waste) disposal and the essential need for sustainable construction materials in infrastructure-rigid contexts, e-waste management in many developing countries is still largely informal, and materials are not adequately used, while at the same time the construction industry is heavily relying on resources intensive materials. This disconnection is seen as an opportunity to include waste flows into material supply chains. This research involves the creation and testing of gypsum based composites containing shredded source-defined e-waste plastic and glass fibre for non-structural building construction applications. Five compositions were designed and tested for compressive strength, density, flexural strength, and water absorption using the reported laboratory procedures. The results show that the incorporation of e-waste-plastics decreases the density and moisture absorption of the composite while the glass fibre reinforcement increases the mechanical performance of the composite. The nominal 15% plastic and 10% glass fibre formulation was selected as optimal because, among the five mixtures tested, it provided the highest compressive and flexural strengths together with the lowest density and water absorption. Compared with the pure gypsum control, it increased compressive strength by 33.1% (24.8 to 33.0 MPa) and flexural strength by 63.6% (6.6 to 10.8 MPa).In addition to material performance, the research is translated to a decentralized e-waste valorisation model, presenting a possible route for converting regional waste streams into construction-material feedstock. The results indicate a possible link between informal recycling practices and small-scale local material production, thereby supporting resource-efficiency and circular-economy transitions in Global South settings.Both empirical and conceptual insights into the role of material innovation as a bridge between waste management and construction systems are provided, with an upgradable pathway for sustainable use of materials for resource utilization.

Zitieren

APA

Akindele, A. O., Onitiri, M. A., & Ogunniyi, P. A. (2026). Development of Light-Weight, Eco-Friendly E-Waste Plastic and Glass Fibre Reinforced Gypsum Composites for Sustainable Building Applications. Journal of Sustainable Materials Processing and Management, 6(2). https://doi.org/10.30880/jsmpm.2026.06.02.005

Vancouver

Akindele AO, Onitiri MA, Ogunniyi PA. Development of Light-Weight, Eco-Friendly E-Waste Plastic and Glass Fibre Reinforced Gypsum Composites for Sustainable Building Applications. Journal of Sustainable Materials Processing and Management. 2026;6(2). doi:10.30880/jsmpm.2026.06.02.005

BibTeX
@article{Akindele2026,
  author = {Akindele, Abdul-Qudus Olajide and Onitiri, Modupe A. and Ogunniyi, Praise Adeola},
  title = {Development of Light-Weight, Eco-Friendly E-Waste Plastic and Glass Fibre Reinforced Gypsum Composites for Sustainable Building Applications},
  journal = {Journal of Sustainable Materials Processing and Management},
  year = {2026},
  volume = {6},
  number = {2},
  doi = {10.30880/jsmpm.2026.06.02.005}
}
Kostenlos starten →