Dynamic Mechanical Analysis of Bio-Based and Synthetic Petroleum Based Polymer Foams with Powder Type Organic Filler at Prolonged Ultra-Violet Exposure
Emerging Advances in Integrated Technology · 2020
DOI: 10.30880/emait.2020.01.01.006 ↗Kurz gefasst
Fachartikel in der Zeitschrift Emerging Advances in Integrated Technology, 2020. Verfasst von M A Zulhakimie und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Wood powder filler applied to the bio-based and epoxy polymer foams has the potential to reinforce the polymer foam structure. The 'Meranti' wood filler type was used as the filler in this analysis. In order to observe the pore size of each sample when exposed to different hours of UV exposure using optical microscopy (OM), this study was made.This analysis was conducted to compare the mechanical properties of each sample with different filler ratios of 0 wt%, 5 wt%, 10 wt%, 15wt% and 20 wt% at different UV exposure hours, which is 0 hour to 6000 hours with a 2000 hour rapid increase. Using the DMA Q800 TA unit, the mechanical properties were studied. In order to obtain the product of their mechanical properties, samples having a scale of 40 x 10 x 5 mm were clamped into the machine. The results will show the value of tan δ, loss modulus and storage modulus from the DMA test.The tan δ value shows that the high tanδvalue will be produced by the higher ratio filler. In contrast to bio-based polymer foams, epoxy polymer foams with powder fillers have the highest tan δ value. It shows that the higher filler ratio can be reported with the lower tan δ value. As the filler ratio filler in the polymer foams increased, the consequence of storage and loss modulus was found to increase. The greater the modulus of loss and the modulus of storage, the lower the temperature. As energy is lost as heat during UV irradiation exposure, bio-based polymer foams with a high powder filler ratio can dissipate more energy.
Zitieren
APA
Zulhakimie, M. A., Rus, A. Z. M., Sulong, N. S. S., A, A. S. Z., & Salim, N. N. S. (2020). Dynamic Mechanical Analysis of Bio-Based and Synthetic Petroleum Based Polymer Foams with Powder Type Organic Filler at Prolonged Ultra-Violet Exposure. Emerging Advances in Integrated Technology. https://doi.org/10.30880/emait.2020.01.01.006
Vancouver
Zulhakimie MA, Rus AZM, Sulong NSS, A ASZ, Salim NNS. Dynamic Mechanical Analysis of Bio-Based and Synthetic Petroleum Based Polymer Foams with Powder Type Organic Filler at Prolonged Ultra-Violet Exposure. Emerging Advances in Integrated Technology. 2020. doi:10.30880/emait.2020.01.01.006
BibTeX
@article{Zulhakimie2020,
author = {Zulhakimie, M A and Rus, Anika Zafiah M. and Sulong, N S S and A, A Syah Z and Salim, N N S},
title = {Dynamic Mechanical Analysis of Bio-Based and Synthetic Petroleum Based Polymer Foams with Powder Type Organic Filler at Prolonged Ultra-Violet Exposure},
journal = {Emerging Advances in Integrated Technology},
year = {2020},
doi = {10.30880/emait.2020.01.01.006}
}
EUVIMED