Analysis of Indentation Test Using Solid Works Simulation
Emerging Advances in Integrated Technology · 2020
DOI: 10.30880/emait.2020.01.01.004 ↗Kurz gefasst
Fachartikel in der Zeitschrift Emerging Advances in Integrated Technology, 2020. Verfasst von Nicholas Sylvester Gukop und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref).
Abstract (Originalsprache)
The finite element analysis of spherical indentation was conducted using the SolidWorks simulation software. The relationship between the load and indention was determined, and comparison with the Hertzian solution was made. In this study, spherical indenters of diameter 5, 10 and 15 mm were used to assess the effect of indenter radius on indentation response at a specified load. The outcome of our study shows that the resulting load-indentation response does not closely correlate; as a result, a difference of 21.2% was observed between the hertz solution and simulated results. The increase in diameter was observed to be associated with the corresponding decrease in indentation depth and the indentation stress. The von Mises stress contour at maximum load was analysed and was observed to be the highest on the indented surface beneath the indenter. The resultant displacement contour shows a uniform displacement distribution.
Zitieren
APA
Gukop, N. S., Kamtu, P. M., & Zwalnan, S. J. (2020). Analysis of Indentation Test Using Solid Works Simulation. Emerging Advances in Integrated Technology. https://doi.org/10.30880/emait.2020.01.01.004
Vancouver
Gukop NS, Kamtu PM, Zwalnan SJ. Analysis of Indentation Test Using Solid Works Simulation. Emerging Advances in Integrated Technology. 2020. doi:10.30880/emait.2020.01.01.004
BibTeX
@article{Gukop2020,
author = {Gukop, Nicholas Sylvester and Kamtu, Peter Muar and Zwalnan, Selfa Johnson},
title = {Analysis of Indentation Test Using Solid Works Simulation},
journal = {Emerging Advances in Integrated Technology},
year = {2020},
doi = {10.30880/emait.2020.01.01.004}
}
EUVIMED