WORKFORCE OPTIMIZATION IN AUTOMOTIVE TOOLING: AN ENVIRONMENTAL WORK SAMPLING MODEL
Jurnal Teknologi Dan Riset Terapan (JATRA) · 28.06.2026 · 8 (1) · 1-8
DOI: 10.30871/jatra.v8i1.12810 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Teknologi Dan Riset Terapan (JATRA), online erschienen am 28.06.2026. Verfasst von Fredy Sumasto und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
This study optimizes labor allocation in automotive mold repair using an environmental-integrated Work Sampling method, addressing gaps in conventional time studies that often ignore contextual variables. Data were collected through 210 observations (42 per day over five days) at MWT, Ltd., incorporating environmental factors such as temperature (31°C) and vibration (0.5 m/s²). The analysis included adequacy testing (N’=168.42), uniformity checks, and standard time calculation using a Westinghouse rating factor of +0.24 and a site-specific allowance of 80.5%, validated against historical data. The results indicate a standardized repair time of 53.16 min/mold at 90% productivity, which is approximately 18% higher than values reported in previous studies due to the inclusion of environmental and competency-related factors. Simulation results suggest that implementing a two-worker shift system could potentially reduce backlog risk by 22% and improve lead time performance from 3.2 to 2.6 days. Environmental factors contributed to 30% of allowance time, revealing a previously unquantified impact. This study introduces a hybrid model integrating environmental ergonomics into non-repetitive task analysis, offering a practical framework for improving productivity, resource allocation, and maintenance efficiency in manufacturing environments.
Zitieren
APA
Sumasto, F., Azzahra, S., Salati, D., Imdam, I. A., Lianny, I. K. M., Sukmawati, W., & Agus, M. (2026). WORKFORCE OPTIMIZATION IN AUTOMOTIVE TOOLING: AN ENVIRONMENTAL WORK SAMPLING MODEL. Jurnal Teknologi Dan Riset Terapan (JATRA), 8(1), 1-8. https://doi.org/10.30871/jatra.v8i1.12810
Vancouver
Sumasto F, Azzahra S, Salati D, Imdam IA, Lianny IKM, Sukmawati W, et al. WORKFORCE OPTIMIZATION IN AUTOMOTIVE TOOLING: AN ENVIRONMENTAL WORK SAMPLING MODEL. Jurnal Teknologi Dan Riset Terapan (JATRA). 2026;8(1):1-8. doi:10.30871/jatra.v8i1.12810
BibTeX
@article{Sumasto2026,
author = {Sumasto, Fredy and Azzahra, Sabrina and Salati, Dianasanti and Imdam, Irma Agustiningsih and Lianny, Indah Kurnia Mahasih and Sukmawati, Wilda and Agus, Muhamad},
title = {WORKFORCE OPTIMIZATION IN AUTOMOTIVE TOOLING: AN ENVIRONMENTAL WORK SAMPLING MODEL},
journal = {Jurnal Teknologi Dan Riset Terapan (JATRA)},
year = {2026},
volume = {8},
number = {1},
pages = {1--8},
doi = {10.30871/jatra.v8i1.12810}
}
EUVIMED