EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

DESIGN AND PROTOTYPE DEVELOPMENT OF AN IOT-BASED TEMPERATURE AND HUMIDITY MONITORING SYSTEM WITH REAL-TIME DATA AND AUTOMATED ALERTS

Nadhrah Wivanius, Willy Isranda Sihombing, Domi Kamsyah

Jurnal Teknologi Dan Riset Terapan (JATRA) · 30.12.2025 · 7 (2) · 29-36

DOI: 10.30871/jatra.v7i2.11679 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknologi Dan Riset Terapan (JATRA), online erschienen am 30.12.2025. Verfasst von Nadhrah Wivanius und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the design and implementation of an Internet of Things (IoT)-based system for real-time monitoring of room temperature and humidity. The system integrates a DHT11 sensor with an ESP32-C3-WROOM-2 microcontroller to measure environmental parameters within ranges of 0–50 °C and 20–90% relative humidity, achieving accuracies of ±2°C and ±5% RH, respectively. Measurement data are displayed on a 20×4 I2C LCD and transmitted wirelessly via Wi-Fi to Google Sheets for cloud-based storage and analysis. The system features an automatic notification mechanism that sends alerts through WhatsApp when environmental conditions exceed predefined thresholds. Calibration testing against the HTC-2 reference standard device demonstrated a total average measurement error of 1.594%, confirming compliance with the DHT11 sensors specified tolerance limits. Consistency tests conducted in both air-conditioned and non-air-conditioned environments revealed that the system effectively captures genuine environmental variations, with higher variability observed in mechanically controlled spaces due to HVAC operational cycles. The developed prototype successfully addresses limitations of conventional monitoring methods by eliminating manual intervention requirements, enabling continuous real-time surveillance, and facilitating rapid preventive actions. Results indicate that the system provides sufficient measurement accuracy and stability for practical applications in residential, commercial, and industrial environmental monitoring, while offering a cost-effective and accessible solution for IoT-based climate control systems.

Zitieren

APA

Wivanius, N., Sihombing, W. I., & Kamsyah, D. (2025). DESIGN AND PROTOTYPE DEVELOPMENT OF AN IOT-BASED TEMPERATURE AND HUMIDITY MONITORING SYSTEM WITH REAL-TIME DATA AND AUTOMATED ALERTS. Jurnal Teknologi Dan Riset Terapan (JATRA), 7(2), 29-36. https://doi.org/10.30871/jatra.v7i2.11679

Vancouver

Wivanius N, Sihombing WI, Kamsyah D. DESIGN AND PROTOTYPE DEVELOPMENT OF AN IOT-BASED TEMPERATURE AND HUMIDITY MONITORING SYSTEM WITH REAL-TIME DATA AND AUTOMATED ALERTS. Jurnal Teknologi Dan Riset Terapan (JATRA). 2025;7(2):29-36. doi:10.30871/jatra.v7i2.11679

BibTeX
@article{Wivanius2025,
  author = {Wivanius, Nadhrah and Sihombing, Willy Isranda and Kamsyah, Domi},
  title = {DESIGN AND PROTOTYPE DEVELOPMENT OF AN IOT-BASED TEMPERATURE AND HUMIDITY MONITORING SYSTEM WITH REAL-TIME DATA AND AUTOMATED ALERTS},
  journal = {Jurnal Teknologi Dan Riset Terapan (JATRA)},
  year = {2025},
  volume = {7},
  number = {2},
  pages = {29--36},
  doi = {10.30871/jatra.v7i2.11679}
}
Kostenlos starten →