EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Effect of fiber orientation on the mechanical properties of sisal/e-glass/epoxy composites containing spent coffee ground-derived activated carbon

Muhammad Muhammad, Darul Ikrami, Adi Setiawan, Muhammad Muhammad, Reza Putra, Lies Banowati, Faizar Rianda

Jurnal Polimesin · 30.10.2026 · 24 (5) · 925

DOI: 10.30811/jpl.v24i5.9852 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Polimesin, online erschienen am 30.10.2026. Verfasst von Muhammad Muhammad und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite the development of natural/synthetic fiber hybridization and the use of bio-fillers have been widely studied, limited knowledge still exists regarding the simultaneous integration of activated carbon of Arabica coffee grounds into sisal/E-glass/epoxy hybrid composites and the effect of fiber orientation variations on their mechanical performance. This research presents a novelty through the development of lightweight hybrid biocomposites based on coffee grounds waste and sisal/E-glass fiber with fiber orientation evaluation. The composite was fabricated using the hand lay-up method with orientation variations of 90°/0°, 0°/90°, and ±45°/45°. The tensile test referred to ASTM D3039, while the microstructure analysis was performed using SEM-EDS. The results showed that the 0°/90° orientation resulted in the highest tensile strength (36.27 MPa) due to the dominance of direct axial load-bearing, while the orientation ±45°/45° resulted in the highest modulus of elasticity (9.36 MPa) through the in-plane shear distribution. SEM observations confirmed the failure mechanisms of fiber fracture, pull-out, matrix cracking, and debonding. The key scientific contributions of the study is to provide an in-depth understanding of the trade-off mechanism between axial load holding capacity and elastic shear response, while providing engineering design guidance for sustainable lightweight structure applications.

Zitieren

APA

Muhammad, M., Ikrami, D., Setiawan, A., Muhammad, M., Putra, R., Banowati, L., & Rianda, F. (2026). Effect of fiber orientation on the mechanical properties of sisal/e-glass/epoxy composites containing spent coffee ground-derived activated carbon. Jurnal Polimesin, 24(5), 925. https://doi.org/10.30811/jpl.v24i5.9852

Vancouver

Muhammad M, Ikrami D, Setiawan A, Muhammad M, Putra R, Banowati L, et al. Effect of fiber orientation on the mechanical properties of sisal/e-glass/epoxy composites containing spent coffee ground-derived activated carbon. Jurnal Polimesin. 2026;24(5):925. doi:10.30811/jpl.v24i5.9852

BibTeX
@article{Muhammad2026,
  author = {Muhammad, Muhammad and Ikrami, Darul and Setiawan, Adi and Muhammad, Muhammad and Putra, Reza and Banowati, Lies and Rianda, Faizar},
  title = {Effect of fiber orientation on the mechanical properties of sisal/e-glass/epoxy composites containing spent coffee ground-derived activated carbon},
  journal = {Jurnal Polimesin},
  year = {2026},
  volume = {24},
  number = {5},
  pages = {925},
  doi = {10.30811/jpl.v24i5.9852}
}
Kostenlos starten →