Microstructure and crystallinity characterization of graphite from petroleum coke for generation IV nuclear reactor material applications
Jurnal Polimesin · 30.10.2026 · 24 (5) · 866
DOI: 10.30811/jpl.v24i5.9130 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Polimesin, online erschienen am 30.10.2026. Verfasst von Syaiful Arif und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
This study aims to analyze the effect of particle size on the microstructural evolution and chemical transformation of petroleum coke as a graphite material precursor for Generation IV nuclear reactor applications. Samples were prepared in two size variations, namely 5 mm and 100 mm, then subjected to thermal treatment at a temperature of 800 °C with a heating rate of 5 °C/min and a holding time of 2 hours in confined atmospheric conditions. Characterization was carried out using Scanning Electron Microscopy (SEM) at magnifications of 500×, 1500×, and 3000× and Fourier Transform Infrared (FTIR) in the range of 4000–400 cm⁻¹. The SEM results showed morphological evolution from an amorphous structure to a layered (lamellar) structure; however, the layer orientation remained irregular, and the material was still classified as turbostratic carbon. The presence of porosity and microcracks indicates that the devolatilization process has not been followed by adequate densification. FTIR analysis shows a decrease in hydroxyl (–OH) and aliphatic C–H functional groups and the appearance of aromatic C=C bonds, indicating the occurrence of initial aromatization, but not yet reaching a perfect graphitic structure. Comparison of particle sizes showed that the 5 mm sample underwent a more advanced transformation than the 100 mm sample, although the transformation remained inhomogeneous because of uneven heat distribution. The results indicate that particle size is a key parameter in the carbonization and graphitization processes. Petroleum coke shows potential as a graphite precursor; however, the process conditions used do not meet the specifications for nuclear graphite. An increase in graphitization temperature, particle size control, and further processes such as densification are required to achieve a more regular and stable crystalline structure.
Zitieren
APA
Arif, S., Gunawarman, G., Bakhri, S., Mustika, D., Kusnanto, K., & Ajiriyanto, M. K. (2026). Microstructure and crystallinity characterization of graphite from petroleum coke for generation IV nuclear reactor material applications. Jurnal Polimesin, 24(5), 866. https://doi.org/10.30811/jpl.v24i5.9130
Vancouver
Arif S, Gunawarman G, Bakhri S, Mustika D, Kusnanto K, Ajiriyanto MK. Microstructure and crystallinity characterization of graphite from petroleum coke for generation IV nuclear reactor material applications. Jurnal Polimesin. 2026;24(5):866. doi:10.30811/jpl.v24i5.9130
BibTeX
@article{Arif2026,
author = {Arif, Syaiful and Gunawarman, Gunawarman and Bakhri, Syaiful and Mustika, Deni and Kusnanto, Kusnanto and Ajiriyanto, Maman Kartaman},
title = {Microstructure and crystallinity characterization of graphite from petroleum coke for generation IV nuclear reactor material applications},
journal = {Jurnal Polimesin},
year = {2026},
volume = {24},
number = {5},
pages = {866},
doi = {10.30811/jpl.v24i5.9130}
}
EUVIMED