CFD-based thermal limit prediction of LiFePO4 submarine battery modules using UDF heat generation and hybrid cooling
Jurnal Polimesin · 30.06.2026 · 24 (3) · 562
DOI: 10.30811/jpl.v24i3.9144 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Polimesin, online erschienen am 30.06.2026. Verfasst von Fajri Narotama und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
This study investigates the transient thermal behavior of LiFePO4 battery modules in a diesel-electric submarine battery compartment under constant 1C and 1.4C discharge conditions. A three-dimensional CFD model was developed in ANSYS® Fluent, with conjugate heat transfer between the battery modules, the air domain, and the liquid cooling channels. Battery heat generation was calculated through a compiled User-Defined Function derived from an equivalent-circuit heat-generation formulation. The module was represented as a homogenized orthotropic solid, allowing the compartment-scale model to be solved without resolving each cell. The heat-source model was validated against published experimental data for a 100 Ah prismatic LFP cell, yielding an RMSE of 0.28°C and an MAE of 0.24°C. At 1C discharge, hybrid cooling reduced the final maximum temperature from 48.25 °C to 45.26°C, while both cooling configurations remained below the 50°C thermal cutoff. At 1.4C discharge, natural convection reached the cutoff at 2140 s, whereas hybrid cooling delayed it to 2403 s, extending the operating window by 263 s (12.3%). Although the reduction in final maximum temperature was limited, the average temperature decreased by 5.62°C. These results indicate that hybrid cooling mainly reduces global heat accumulation, while internal heat conduction remains the dominant factor governing local hotspot formation.
Zitieren
APA
Narotama, F., & Prabowo, P. (2026). CFD-based thermal limit prediction of LiFePO4 submarine battery modules using UDF heat generation and hybrid cooling. Jurnal Polimesin, 24(3), 562. https://doi.org/10.30811/jpl.v24i3.9144
Vancouver
Narotama F, Prabowo P. CFD-based thermal limit prediction of LiFePO4 submarine battery modules using UDF heat generation and hybrid cooling. Jurnal Polimesin. 2026;24(3):562. doi:10.30811/jpl.v24i3.9144
BibTeX
@article{Narotama2026,
author = {Narotama, Fajri and Prabowo, Prabowo},
title = {CFD-based thermal limit prediction of LiFePO4 submarine battery modules using UDF heat generation and hybrid cooling},
journal = {Jurnal Polimesin},
year = {2026},
volume = {24},
number = {3},
pages = {562},
doi = {10.30811/jpl.v24i3.9144}
}
EUVIMED