EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Effect of alkali fusion temperature on the synthesis and characteristics of nanosilica from silica sand

Muhammad Sadat Hamzah, Muchsin Muchsin, Abdul Muis, Dino Hasyim, Iqrham Dwi Putra Annas, Muhammad Syaiful Fadly, Bakri Bakri, Sri Chandrabakty

Jurnal Polimesin · 30.06.2026 · 24 (3) · 429

DOI: 10.30811/jpl.v24i3.8695 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Polimesin, online erschienen am 30.06.2026. Verfasst von Muhammad Sadat Hamzah und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing demand for nanosilica in industrial applications has encouraged the utilization of abundant natural silica sand as a sustainable raw material. This study investigates the effect of alkali fusion temperature on the synthesis and characteristics of nanosilica derived from silica sand from Central Sulawesi, Indonesia. A cost-effective, energy-efficient synthesis method is needed to transform raw sand into high-value nanoparticles with controlled morphology. The study employed the alkali fusion method, where silica sand was reacted with NaOH at temperatures ranging from 400°C to 700°C, followed by leaching and titration to pH 7-8 to produce nanosilica. Characterization results via XRF and XRD confirmed that the synthesized nanosilica maintains a high SiO2 concentration (up to 72.46%) and exhibits a coexistence of amorphous phases and crystalline quartz. Morphological analysis by TEM revealed that increasing the fusion temperature decreases particle size from 18.91 nm at 400°C to 14.00 nm at 700°C, indicating that higher thermal energy promotes structural decomposition. These findings suggest that the alkali fusion temperature is an important parameter for controlling nanosilica dimensions. Further evaluation, including yield and recovery analysis, is required to assess process efficiency and its potential for large-scale applications.

Zitieren

APA

Hamzah, M. S., Muchsin, M., Muis, A., Hasyim, D., Annas, I. D. P., Fadly, M. S., Bakri, B., & Chandrabakty, S. (2026). Effect of alkali fusion temperature on the synthesis and characteristics of nanosilica from silica sand. Jurnal Polimesin, 24(3), 429. https://doi.org/10.30811/jpl.v24i3.8695

Vancouver

Hamzah MS, Muchsin M, Muis A, Hasyim D, Annas IDP, Fadly MS, et al. Effect of alkali fusion temperature on the synthesis and characteristics of nanosilica from silica sand. Jurnal Polimesin. 2026;24(3):429. doi:10.30811/jpl.v24i3.8695

BibTeX
@article{Hamzah2026,
  author = {Hamzah, Muhammad Sadat and Muchsin, Muchsin and Muis, Abdul and Hasyim, Dino and Annas, Iqrham Dwi Putra and Fadly, Muhammad Syaiful and Bakri, Bakri and Chandrabakty, Sri},
  title = {Effect of alkali fusion temperature on the synthesis and characteristics of nanosilica from silica sand},
  journal = {Jurnal Polimesin},
  year = {2026},
  volume = {24},
  number = {3},
  pages = {429},
  doi = {10.30811/jpl.v24i3.8695}
}
Kostenlos starten →