EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Analysis of the mechanical strength of composite materials reinforced with coconut fiber and recycled paper

I Made Kastiawan, Indah Nurpriyanti, Maula Nafi, Mastuki Mastuki, Maulana Aditya Wahyu Purnama Aji, Dimas Pribadi Nugroho

Jurnal Polimesin · 26.04.2026 · 24 (2) · 260

DOI: 10.30811/jpl.v24i2.8320 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Polimesin, online erschienen am 26.04.2026. Verfasst von I Made Kastiawan und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Waste materials that accumulate in the environment can cause serious ecological problems. Paper waste and coconut fibres are abundant materials, and improper management of these may lead to environmental degradation. Therefore, converting waste into value-added products represents an important sustainable approach. This study explores the development of a sustainable biocomposite material composed of recycled paper waste and coconut fibers as reinforcement phases, combined with a Polyvinyl Acetate (PVA) matrix system. The composite fabrication process involved several stages. Used paper was cut into small pieces, mixed with water at a 1:1 ratio, and blended to form a damp paper pulp slurry. Coconut fibres were combed, straightened, and cut into lengths of 1-9 cm, with weight fractions of 0-40%. The paper pulp was mixed with Polyvinyl Acetate (PVA) at a fixed weight fraction of 35%, followed by the addition of coconut fibres according to the designated compositions, and then molded in accordance with ASTM standards for tensile and bending tests. This study introduces a novel fully waste-based composite system combining used paper waste and coconut fibres with Polyvinyl Acetate (PVA) as a natural matrix, demonstrating effective mechanical reinforcement without synthetic resins or cement-based binders. The highest tensile stress (12.32 MPa) was obtained at a fibre length of 9 cm and a weight fraction of 20%, while the highest bending stress (72.6 MPa) occurred at a fibre length of 1 cm and a weight fraction of 10%. The tensile strength increased by 38% compared to the fibreless composite, confirming the reinforcing effectiveness of coconut fibres. These results highlight the potential of the developed composite as a sustainable alternative material for wood-based products in non-structural applications.

Zitieren

APA

Kastiawan, I. M., Nurpriyanti, I., Nafi, M., Mastuki, M., Aji, M. A. W. P., & Nugroho, D. P. (2026). Analysis of the mechanical strength of composite materials reinforced with coconut fiber and recycled paper. Jurnal Polimesin, 24(2), 260. https://doi.org/10.30811/jpl.v24i2.8320

Vancouver

Kastiawan IM, Nurpriyanti I, Nafi M, Mastuki M, Aji MAWP, Nugroho DP. Analysis of the mechanical strength of composite materials reinforced with coconut fiber and recycled paper. Jurnal Polimesin. 2026;24(2):260. doi:10.30811/jpl.v24i2.8320

BibTeX
@article{Kastiawan2026,
  author = {Kastiawan, I Made and Nurpriyanti, Indah and Nafi, Maula and Mastuki, Mastuki and Aji, Maulana Aditya Wahyu Purnama and Nugroho, Dimas Pribadi},
  title = {Analysis of the mechanical strength of composite materials reinforced with coconut fiber and recycled paper},
  journal = {Jurnal Polimesin},
  year = {2026},
  volume = {24},
  number = {2},
  pages = {260},
  doi = {10.30811/jpl.v24i2.8320}
}
Kostenlos starten →