Experimental analysis of process parameters in semi-automatic blow molding of PET bottles: a case study at Universitas Negeri Malang product
Jurnal Polimesin · 28.02.2026 · 24 (1) · 42
DOI: 10.30811/jpl.v24i1.8192 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Polimesin, online erschienen am 28.02.2026. Verfasst von Obaja Eden Sentosa Riyanto und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
This research aims to analyze the effects of key process parameters on product quality and defects in the semi-automatic blow molding of Polyethylene Terephthalate (PET) bottles at Malang State University (UM). The background of this study stems from the increasing demand for high-quality PET packaging and the limited number of direct experimental studies on semi-automatic machines, with a limited number of tests. Most previous studies have emphasized model-based simulation and optimization, while practical studies that observe the relationship between process parameters and defect characteristics remain rare. Unlike simulation-based studies, this work is based on direct field experiments under stable, industry-relevant machine settings to evaluate product quality and production readiness for mass manufacturing. The research method was conducted through direct experiments using 12.5 g PET preforms and a 330 mL capacity two-cavity mold. The main variables tested included preform temperature (70°C and 80°C), blow delay time (0.30–0.50 s), and low-blow duration (0.20–0.50 s). Bottle quality was evaluated based on thickness measurements, dimensions, and visual analysis of defects such as wrinkles, collapses, and wall irregularities. The results showed that a preform temperature of 80 °C and a low-blow duration of 0.50 s produced bottles of the highest quality, characterized by uniform wall thickness, flat bases, and minimal defects. In contrast, low-temperature settings (70 °C) resulted in high viscosity, leading to deformation and wrinkles. This optimal combination of parameters was proven to improve bottle structure homogeneity and reduce dimensional shrinkage to 1%. This study emphasizes the importance of temperature and blow time control in achieving stable, efficient, and mass-oriented PET bottle production, while strengthening the role of universities in experimental manufacturing applied research.
Zitieren
APA
Riyanto, O. E. S., Tsamroh, D. I., Wandoyo, I. A., Pancayudha, D. A. P., & Faidillah, H. (2026). Experimental analysis of process parameters in semi-automatic blow molding of PET bottles: a case study at Universitas Negeri Malang product. Jurnal Polimesin, 24(1), 42. https://doi.org/10.30811/jpl.v24i1.8192
Vancouver
Riyanto OES, Tsamroh DI, Wandoyo IA, Pancayudha DAP, Faidillah H. Experimental analysis of process parameters in semi-automatic blow molding of PET bottles: a case study at Universitas Negeri Malang product. Jurnal Polimesin. 2026;24(1):42. doi:10.30811/jpl.v24i1.8192
BibTeX
@article{Riyanto2026,
author = {Riyanto, Obaja Eden Sentosa and Tsamroh, Dewi Izzatus and Wandoyo, Ilham Akbar and Pancayudha, Den Arsyah Pilar and Faidillah, Hikmal},
title = {Experimental analysis of process parameters in semi-automatic blow molding of PET bottles: a case study at Universitas Negeri Malang product},
journal = {Jurnal Polimesin},
year = {2026},
volume = {24},
number = {1},
pages = {42},
doi = {10.30811/jpl.v24i1.8192}
}
EUVIMED