EUVIMEDEUVIMED entdecken
Crossref

Influence of Physico-Chemical Parameters on Fuel Briquettes Properties Formulated with Mixture of Biomasses

Inna Samomssa, Yvette Jiokap Nono, Cornelius Tsamo, Mihaela Rodica Dinica, Richard Kamga

Journal of Environmental Science and Pollution Research · 06.05.2019 · 5 (1) · 338-341

DOI: 10.30799/jespr.165.19050202 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Environmental Science and Pollution Research, online erschienen am 06.05.2019. Verfasst von Inna Samomssa und 4 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The purpose of this study was to investigate influence of physico-chemical parameters on fuel briquette properties produced from a mixture of cassava and plantain peelings, and corn cob. FTIR and XRD of each biomass was determined and fractional factorial design used in classifying influence of physico-chemical parameters on degradation rate and strength of briquette. The results show that the three biomasses have similar infrared spectra. The mains functional groups present are; OH alcohol, C-H, C-O and C-C. These could produce hydrogen bond during densification. XRD reveals presence of cellulose and starch in the three biomasses. Cassava peelings have the highest amount of starch compared to others. Thus, cassava peelings can play the rule of binder. Results also reveal that for degradation rate of briquette, the average absolute error (AAE) ranged from 0.00% to 2.82% and varies between 0.00% to 2.88% for strength. These AAE are closer to zero and can be considered negligible compared to observed responses. This demonstrates the reliability of the models. Besides, adjusted R2, absolute average deviation (AAD), bias factor and exactitude factor obtained are in accordance with interval indicated for validation of model. The influence of evaluated parameters for degradation rate of briquette in descending order of importance are: the briquetting mass, moisture content, briquetting pressure, time before demoulding, diameter of mould, particle size and briquetting temperature. For strength, pressure and particle size are the most influential parameters followed by briquetting time, moisture content, diameter of mould, briquetting mass and briquetting temperature. The influence levels of the different parameters on the strength and degradation rate of briquette simultaneously show that particle size, moisture content, briquetting pressure and briquetting mass are the most important. However, they act in opposite directions for degradation rate and strength of briquette.

Zitieren

APA

Samomssa, I., Nono, Y. J., Tsamo, C., Dinica, M. R., & Kamga, R. (2019). Influence of Physico-Chemical Parameters on Fuel Briquettes Properties Formulated with Mixture of Biomasses. Journal of Environmental Science and Pollution Research, 5(1), 338-341. https://doi.org/10.30799/jespr.165.19050202

Vancouver

Samomssa I, Nono YJ, Tsamo C, Dinica MR, Kamga R. Influence of Physico-Chemical Parameters on Fuel Briquettes Properties Formulated with Mixture of Biomasses. Journal of Environmental Science and Pollution Research. 2019;5(1):338-341. doi:10.30799/jespr.165.19050202

BibTeX
@article{Samomssa2019,
  author = {Samomssa, Inna and Nono, Yvette Jiokap and Tsamo, Cornelius and Dinica, Mihaela Rodica and Kamga, Richard},
  title = {Influence of Physico-Chemical Parameters on Fuel Briquettes Properties Formulated with Mixture of Biomasses},
  journal = {Journal of Environmental Science and Pollution Research},
  year = {2019},
  volume = {5},
  number = {1},
  pages = {338--341},
  doi = {10.30799/jespr.165.19050202}
}
Kostenlos starten →