EUVIMEDEUVIMED entdecken
Crossref

Real-time friction torque estimation on a diesel engine using the crankshaft speed fluctuation

Seddak Mohammed, Lakhdari A. Amina

Engineering review · 2021

DOI: 10.30765/er.1515 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering review, 2021. Verfasst von Seddak Mohammed und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Under the pressure of stricter regulations on pollutant emissions and the desire of users for lower fuel consumption and more comfortable driving, engine control based on torque has been developed. To provide an accurate estimate of effective torque, friction losses must be modeled. The details of a model that predicts the total instantaneous friction torque for compression ignition engines are described. The model is based on a combination of the dynamic model of the crankshaft and the thermodynamic model. The total instantaneous friction torque is determined using the instantaneous measurements or numerical predictions of the gas pressure in the combustion chamber, the rotational speed of the crankshaft and the load torque. The experimental data and the numerical simulation results were compared. The comparison between the different variables shows a good agreement between the simulation and the experimental results.

Zitieren

APA

Mohammed, S., & Amina, L. A. (2021). Real-time friction torque estimation on a diesel engine using the crankshaft speed fluctuation. Engineering review. https://doi.org/10.30765/er.1515

Vancouver

Mohammed S, Amina LA. Real-time friction torque estimation on a diesel engine using the crankshaft speed fluctuation. Engineering review. 2021. doi:10.30765/er.1515

BibTeX
@article{Mohammed2021,
  author = {Mohammed, Seddak and Amina, Lakhdari A.},
  title = {Real-time friction torque estimation on a diesel engine using the crankshaft speed fluctuation},
  journal = {Engineering review},
  year = {2021},
  doi = {10.30765/er.1515}
}
Kostenlos starten →