EUVIMEDEUVIMED entdecken
Crossref

Multi-Response Evaluation of HA/YSZ Powder-Mixed Electrical Discharge Machining of Ti-6Al-4V: Surface Integrity with Preliminary Antibacterial Assessment

Sara Jaafar Shawi, Waqass S. Khudhir, Ali Mundher Mustafa

Engineering and Technology Journal · 16.11.2026 · 44 (12) · 141-167

DOI: 10.30684/2412-0758.2433 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering and Technology Journal, online erschienen am 16.11.2026. Verfasst von Sara Jaafar Shawi und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study comparatively investigated the effects of hydroxyapatite (HA), yttria-stabilized zirconia (YSZ), and a 50:50 wt.% HA–YSZ mixture on the powder-mixed electrical discharge machining (PMEDM) of Ti-6Al-4V, focusing on machining performance, surface integrity, and preliminary antibacterial activity. The nanopowders were dispersed in deionized water at a fixed total concentration of 1.0 g/L. A three-factor, three-level full factorial design comprising 27 experimental conditions was employed, with peak current (18, 24, and 30 A), pulse-on time (100, 150, and 200 μs), and nanopowder type as the investigated factors. Surface roughness (Ra), recast layer thickness (RLT), material removal rate (MRR), and electrode wear rate (EWR) were evaluated. Main-effects analysis of variance (ANOVA) indicated that nanopowder type significantly affected Ra, peak current and pulse-on time significantly influenced MRR, and all three factors significantly affected EWR, whereas no statistically significant main effect was detected for RLT. Grey relational analysis (GRA) ranked Experiment 14 (HA, 30 A, 100 μs) highest among the investigated conditions (GRG = 0.7468), followed by Experiments 1 and 25 (YSZ; GRG = 0.7406 and 0.7390, respectively). These rankings represent relative performance within the unreplicated experimental design rather than a statistically validated optimum. The three highest-ranked conditions were further characterized using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) and subjected to preliminary antibacterial assessment against a non-reference clinical isolate of Staphylococcus aureus. The total inhibition-zone diameters were 21, 20, and 30 mm for Experiments 14, 1, and 25, respectively, including the 8-mm specimen diameter, while the untreated Ti-6Al-4V reference showed no observable inhibition zone. The antibacterial assessment involved single observations without independent biological replication or a powder-free EDM control. Overall, the findings demonstrate response-dependent effects of the investigated PMEDM conditions and preliminary antibacterial responses of selected machined surfaces. Further replicated and controlled investigations are required to establish the mechanisms of inhibition and evaluate their biomedical relevance.

Zitieren

APA

Shawi, S. J., Khudhir, W. S., & Mustafa, A. M. (2026). Multi-Response Evaluation of HA/YSZ Powder-Mixed Electrical Discharge Machining of Ti-6Al-4V: Surface Integrity with Preliminary Antibacterial Assessment. Engineering and Technology Journal, 44(12), 141-167. https://doi.org/10.30684/2412-0758.2433

Vancouver

Shawi SJ, Khudhir WS, Mustafa AM. Multi-Response Evaluation of HA/YSZ Powder-Mixed Electrical Discharge Machining of Ti-6Al-4V: Surface Integrity with Preliminary Antibacterial Assessment. Engineering and Technology Journal. 2026;44(12):141-167. doi:10.30684/2412-0758.2433

BibTeX
@article{Shawi2026,
  author = {Shawi, Sara Jaafar and Khudhir, Waqass S. and Mustafa, Ali Mundher},
  title = {Multi-Response Evaluation of HA/YSZ Powder-Mixed Electrical Discharge Machining of Ti-6Al-4V: Surface Integrity with Preliminary Antibacterial Assessment},
  journal = {Engineering and Technology Journal},
  year = {2026},
  volume = {44},
  number = {12},
  pages = {141--167},
  doi = {10.30684/2412-0758.2433}
}
Kostenlos starten →