EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wear test induced effects on mechanical damage, chemical composition and Young’s modulus of selected types of carbides

Iwona Jonczy, Krzysztof Filipowicz, Anna Kasprzyk, Jacek Podwórny

Tribologia - Finnish Journal of Tribology · 17.08.2026 · 43 (1–2)

DOI: 10.30678/fjt.179875 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tribologia - Finnish Journal of Tribology, online erschienen am 17.08.2026. Verfasst von Iwona Jonczy und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cemented WC–Co carbides are widely used in mining cutting tools due to their high hardness and abrasion resistance. In this study, five industrial carbide grades (G10, B2, B45, B65, and B23G) were investigated under abrasive wear conditions using a corundum-based medium simulating rock-cutting environments. Quantitative wear analysis and SEM observations revealed abrasive wear in all specimens, mainly in the form of surface chipping and microchipping accompanied by wear debris. A clear wear-resistance ranking was established: G10 > B2 > B45 > B23G > B65. Carbide G10 exhibited the highest wear resistance and the lowest surface damage due to its fine WC grain size, high hardness, and low cobalt content. In contrast, B65 and B23G showed more intensive microchipping associated with higher ductility resulting from increased cobalt content and/or coarser WC grains. Carbide B2 exhibited intermediate wear behavior with relatively high variability between specimen edges. The wear tests did not significantly affect the chemical composition or elastic properties of the investigated carbides. The measured WC and Co contents remained consistent with manufacturer data, while Young’s modulus values ranged from 606 to 711 GPa after testing. The results confirm a strong relationship between WC–Co microstructure and abrasive wear resistance, indicating that fine-grained low-cobalt carbides are most suitable for highly abrasive mining conditions.

Zitieren

APA

Jonczy, I., Filipowicz, K., Kasprzyk, A., & Podwórny, J. (2026). Wear test induced effects on mechanical damage, chemical composition and Young’s modulus of selected types of carbides. Tribologia - Finnish Journal of Tribology, 43(1–2). https://doi.org/10.30678/fjt.179875

Vancouver

Jonczy I, Filipowicz K, Kasprzyk A, Podwórny J. Wear test induced effects on mechanical damage, chemical composition and Young’s modulus of selected types of carbides. Tribologia - Finnish Journal of Tribology. 2026;43(1–2). doi:10.30678/fjt.179875

BibTeX
@article{Jonczy2026,
  author = {Jonczy, Iwona and Filipowicz, Krzysztof and Kasprzyk, Anna and Podwórny, Jacek},
  title = {Wear test induced effects on mechanical damage, chemical composition and Young’s modulus of selected types of carbides},
  journal = {Tribologia - Finnish Journal of Tribology},
  year = {2026},
  volume = {43},
  number = {1–2},
  doi = {10.30678/fjt.179875}
}
Kostenlos starten →