EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application of SHapley Additive ExPlanation machine learning approach and ANNs to analyze friction phenomenon in low-carbon steel/tool steel contacts

Tomasz Trzepieciński, Marwan T. Mezher, Marek Kowalik, Sherwan Mohammed Najm, Mihaela Oleksik, Salah Eddine Laouini, Salwa O. Mohammed

Tribologia - Finnish Journal of Tribology · 17.08.2026 · 43 (1–2)

DOI: 10.30678/fjt.173168 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tribologia - Finnish Journal of Tribology, online erschienen am 17.08.2026. Verfasst von Tomasz Trzepieciński und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The friction analysis in sheet metal forming is difficult due to the complex influence of numerous friction process parameters on the coefficient of friction (COF). Artificial intelligence tools are one of the methods supporting the analysis of complex models. This article presents the application of Additive ExPlanation (SHAP) Machine Learning (ML) methods and artificial neural networks to recognize important friction process parameters based on strip drawing test results for low-carbon steel/tool ​​steel contacts. Friction tests were conducted under lubrication conditions with selected vegetable oils, an alternative to petroleum-based lubricants consistent with sustainable manufacturing. Experimental results showed that rape-seed oil demonstrated the best lubrication performance among the analysed oils with higher and lower viscosity categories. Cumulative SHAP plots and Shapley values indicated that the average surface roughness of counter samples demonstrated the most significant relative importance (35.02%) of a given variable on the COF. The second most significant factor affecting COF was contact pressure, with relative importance of 23.98%-29.33%, depending on the ML algorithm used. The Gradient Boosting ML algorithm demonstrated the best predictive ability over all other tested algorithms (Decision Tree, linear regression, Random Forest, Ridge, and Lasso). Based on the obtained results, it can be concluded that ML models enable the prediction of the COF under various friction conditions, allowing the evaluation of new lubricant formulations already at the sheet metal forming process design stage, thereby reducing the number of laboratory tests.

Zitieren

APA

Trzepieciński, T., Mezher, M. T., Kowalik, M., Najm, S. M., Oleksik, M., Laouini, S. E., & Mohammed, S. O. (2026). Application of SHapley Additive ExPlanation machine learning approach and ANNs to analyze friction phenomenon in low-carbon steel/tool steel contacts. Tribologia - Finnish Journal of Tribology, 43(1–2). https://doi.org/10.30678/fjt.173168

Vancouver

Trzepieciński T, Mezher MT, Kowalik M, Najm SM, Oleksik M, Laouini SE, et al. Application of SHapley Additive ExPlanation machine learning approach and ANNs to analyze friction phenomenon in low-carbon steel/tool steel contacts. Tribologia - Finnish Journal of Tribology. 2026;43(1–2). doi:10.30678/fjt.173168

BibTeX
@article{Trzepieciski2026,
  author = {Trzepieciński, Tomasz and Mezher, Marwan T. and Kowalik, Marek and Najm, Sherwan Mohammed and Oleksik, Mihaela and Laouini, Salah Eddine and Mohammed, Salwa O.},
  title = {Application of SHapley Additive ExPlanation machine learning approach and ANNs to analyze friction phenomenon in low-carbon steel/tool steel contacts},
  journal = {Tribologia - Finnish Journal of Tribology},
  year = {2026},
  volume = {43},
  number = {1–2},
  doi = {10.30678/fjt.173168}
}
Kostenlos starten →