EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Evaluation of Titanium Alloy Surface Roughness After Phosphoric Acid Etching

Livia Wijaya, Trijani Suwandi, Eddy Eddy, Rosalina Tjandrawinata, Jeti Erawati, Deviyanti Pratiwi

Odonto : Dental Journal · 31.12.2025 · 12 (3) · 280

DOI: 10.30659/odj.12.3.280-291 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Odonto : Dental Journal, online erschienen am 31.12.2025. Verfasst von Livia Wijaya und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Tooth loss can be caused by periodontal disease, caries, and other factors. Dental implants made of titanium are a common solution to replace tooth loss. Titanium grade 5 (Ti-6Al-4V) is often chosen for an implant. Modern commercial implant surface roughness (Ra) ranges from 1 to 2 μm. Surface roughness has an important role in osseointegration. The acid etching method can be used to improve surface roughness. This study evaluates titanium alloy surface roughness after etching with varying concentrations of H3PO4 acid.

Method

A laboratory experiment with a pre-test and post-test group design. 25 titanium alloy samples were divided into 5 groups (n=5) and treated with saline, HCl 37%, and H3PO4 acid 38%, 48%, and 58%. Surface roughness was measured using a surface roughness tester, while EDS and SEM tests analyzed titanium composition and surface characteristics.

Result

The titanium used in this study is a titanium alloy. Surface roughness modification using acid had a higher roughness compare to saline with significant different (p0.05). Referring to the SEM results, each acid showed morphological changes on the surface and for saline there were no morphological changes.

Conclusion

Varying concentrations of H3PO4 acid can effectively improve the surface roughness of titanium alloys, with solutions at 48% and 58% demonstrating similar effectiveness to 37% HCl acid.

Zitieren

APA

Wijaya, L., Suwandi, T., Eddy, E., Tjandrawinata, R., Erawati, J., & Pratiwi, D. (2025). Evaluation of Titanium Alloy Surface Roughness After Phosphoric Acid Etching. Odonto : Dental Journal, 12(3), 280. https://doi.org/10.30659/odj.12.3.280-291

Vancouver

Wijaya L, Suwandi T, Eddy E, Tjandrawinata R, Erawati J, Pratiwi D. Evaluation of Titanium Alloy Surface Roughness After Phosphoric Acid Etching. Odonto : Dental Journal. 2025;12(3):280. doi:10.30659/odj.12.3.280-291

BibTeX
@article{Wijaya2025,
  author = {Wijaya, Livia and Suwandi, Trijani and Eddy, Eddy and Tjandrawinata, Rosalina and Erawati, Jeti and Pratiwi, Deviyanti},
  title = {Evaluation of Titanium Alloy Surface Roughness After Phosphoric Acid Etching},
  journal = {Odonto : Dental Journal},
  year = {2025},
  volume = {12},
  number = {3},
  pages = {280},
  doi = {10.30659/odj.12.3.280-291}
}
Kostenlos starten →