EUVIMEDEUVIMED entdecken
Crossref

Pengaruh Proses Equal Channel Angular Pressing Terhadap Sifat Mekanik Aluminium Silikon Dengan Suhu Anil 300°C

Doni Eka Phutra Damanik, Yulfitra Yulfitra

Jurnal Rekayasa Material, Manufaktur dan Energi · 2018

DOI: 10.30596/rmme.v1i1.2433 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Rekayasa Material, Manufaktur dan Energi, 2018. Verfasst von Doni Eka Phutra Damanik und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this study to study the effect of the Equal Channel Angular Pressing process the mechanical properties of aluminum silicon with annealing temperature of 300 ° C. An aluminum silicon rod with a length of 40 mm and a width of 9.5 mm in diameter is passed to the ECAP mold with a mold flow angle of 120 °. Material hardness and microstructure of materials before and after the ECAP process are examined and compared. The results showed that after the ECAP process, the hardness of aluminum silicon in the longitudinal section increased and was fairly evenly distributed, ie, at annealing time of 10 minutes the hardness value was 54.30 BHN, at 15 minutes resistance the hardness increased to 55.08 BHN and 25 minutes the hardness value rose to 55.69 BHN, as well as the microstructure showed that the longer the time annealed, the finer the grains on silicon aluminum.

Zitieren

APA

Damanik, D. E. P., & Yulfitra, Y. (2018). Pengaruh Proses Equal Channel Angular Pressing Terhadap Sifat Mekanik Aluminium Silikon Dengan Suhu Anil 300°C. Jurnal Rekayasa Material, Manufaktur dan Energi. https://doi.org/10.30596/rmme.v1i1.2433

Vancouver

Damanik DEP, Yulfitra Y. Pengaruh Proses Equal Channel Angular Pressing Terhadap Sifat Mekanik Aluminium Silikon Dengan Suhu Anil 300°C. Jurnal Rekayasa Material, Manufaktur dan Energi. 2018. doi:10.30596/rmme.v1i1.2433

BibTeX
@article{Damanik2018,
  author = {Damanik, Doni Eka Phutra and Yulfitra, Yulfitra},
  title = {Pengaruh Proses Equal Channel Angular Pressing Terhadap Sifat Mekanik Aluminium Silikon Dengan Suhu Anil 300°C},
  journal = {Jurnal Rekayasa Material, Manufaktur dan Energi},
  year = {2018},
  doi = {10.30596/rmme.v1i1.2433}
}
Kostenlos starten →