Analisa Aerodinamika Bodi Kendaraan Mataram Proto Diesel dengan ANSYS 15.0
Jurnal Engine: Energi, Manufaktur, dan Material · 2019
DOI: 10.30588/jeemm.v3i1.481 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Engine: Energi, Manufaktur, dan Material, 2019. Verfasst von I Gusti Gde Badrawada und 2 weiteren Autor:innen.
Abstract (Originalsprache)
The goal of this research was to find out the aerodynamic body design of Mataram Proto. Using Solidwork 2015 for modeling the body and Ansys 2015 for numerical simulation were the main tools of this research. The body was drawn with scale 1: 1 and then imported into Ansys 2015 for meshing. The unstructured meshes were used in this research. After those, using Ansys 2015, the numerical simulation was conducted with viscous model k - e with realizable type. The result of this research was the average drag coefficient of the original Mataram Proto body was 0,17 and its average lift coefficient was 0.17. For the modification Mataram Proto body, the average drag coefficient was 0.06 and 0.13 for average lift coefficient. These proved that the modification Mataran Proto body was more aerodynamic.
Zitieren
APA
Badrawada, I. G. G., Purwanto, A., & Firlanda, E. R. (2019). Analisa Aerodinamika Bodi Kendaraan Mataram Proto Diesel dengan ANSYS 15.0. Jurnal Engine: Energi, Manufaktur, dan Material. https://doi.org/10.30588/jeemm.v3i1.481
Vancouver
Badrawada IGG, Purwanto A, Firlanda ER. Analisa Aerodinamika Bodi Kendaraan Mataram Proto Diesel dengan ANSYS 15.0. Jurnal Engine: Energi, Manufaktur, dan Material. 2019. doi:10.30588/jeemm.v3i1.481
BibTeX
@article{Badrawada2019,
author = {Badrawada, I Gusti Gde and Purwanto, Adi and Firlanda, Edo Riyan},
title = {Analisa Aerodinamika Bodi Kendaraan Mataram Proto Diesel dengan ANSYS 15.0},
journal = {Jurnal Engine: Energi, Manufaktur, dan Material},
year = {2019},
doi = {10.30588/jeemm.v3i1.481}
}
EUVIMED