EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

High Energy X-Ray Dosimetry Using (ZnO)0.2(TeO2)0.8 Thin Filmbased Real-time X-Ray Sensor

M. M. Idris, I. O. Olarinoye, M. T. Kolo, S. O. Ibrahim, J. K. Audu

Non-Metallic Material Science · 2023

DOI: 10.30564/nmms.v5i1.5369 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Non-Metallic Material Science, 2023. Verfasst von M. M. Idris und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study reports the dosimetric response of a (ZnO)0.2(TeO2)0.8 thin film sensor irradiated with high-energy X-ray radiation at various doses. The spray pyrolysis method was used for the film deposition on soda-lime glass substrate using zinc acetate dehydrate and tellurium dioxide powder as the starting precursors. The structural and morphological properties of the film were determined. The I-V characteristics measurements were performed during irradiation with a 6 MV X-ray beam from a Linac. The results revealed that the XRD pattern of the AS-deposited thin film is non-crystalline (amorphous) in nature. The FESEM image shows the non-uniform shape of nanoparticles agglomerated separately, and the EDX spectrum shows the presence of Te, Zn, and O in the film. The I-V characteristics measurements indicate that the current density increases linearly with X-ray doses (0-250 cGy) for all applied voltages (1-6 V). The sensitivity of the thin film sensor has been found to be in the range of 0.37-0.94 mA/cm2 /Gy. The current-voltage measurement test for fading normalised in percentage to day 0 was found in the order of day 0 > day 15 > day 30 > day 1 > day 2. These results are expected to be beneficial for fabricating cheap and practical X-ray sensors.

Zitieren

APA

Idris, M. M., Olarinoye, I. O., Kolo, M. T., Ibrahim, S. O., & Audu, J. K. (2023). High Energy X-Ray Dosimetry Using (ZnO)0.2(TeO2)0.8 Thin Filmbased Real-time X-Ray Sensor. Non-Metallic Material Science. https://doi.org/10.30564/nmms.v5i1.5369

Vancouver

Idris MM, Olarinoye IO, Kolo MT, Ibrahim SO, Audu JK. High Energy X-Ray Dosimetry Using (ZnO)0.2(TeO2)0.8 Thin Filmbased Real-time X-Ray Sensor. Non-Metallic Material Science. 2023. doi:10.30564/nmms.v5i1.5369

BibTeX
@article{Idris2023,
  author = {Idris, M. M. and Olarinoye, I. O. and Kolo, M. T. and Ibrahim, S. O. and Audu, J. K.},
  title = {High Energy X-Ray Dosimetry Using (ZnO)0.2(TeO2)0.8 Thin Filmbased Real-time X-Ray Sensor},
  journal = {Non-Metallic Material Science},
  year = {2023},
  doi = {10.30564/nmms.v5i1.5369}
}
Kostenlos starten →