EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Optimization of the Mechanical Properties of Epoxy–Palm Fiber Composites Using a Simplex Experimental Design

Ali Rakrouk, Ltaief Lammari, Ikram Issami, Sana Ben Khlifa, Khaled El Moueddeb, Rachi Nasri

Journal of Building Material Science · 17.07.2026 · 37-47

DOI: 10.30564/jbms.v8i3.13431 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Building Material Science, online erschienen am 17.07.2026. Verfasst von Ali Rakrouk und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a study on the development of environmentally friendly materials. In the current context of environmental preservation, facing climate change and the search for material solutions, the development of ecological materials has become essential. Composites reinforced with natural fibers offer a sustainable alternative to synthetic materials. Among these fibers, palm fibers stand out for their low cost, lightness, and abundance. Derived from agricultural waste, they contribute to the valorization of local resources while reducing environmental impact. Their use promotes the development of high-performance and ecological composites. The objective of this study was to develop epoxy matrix composites reinforced with palm fibers. A simplex experimental design was used to vary the fiber concentration from 5% to 20%, while maintaining a constant resin/hardener ratio. The physical and mechanical properties were evaluated by tensile tests, viscosity analysis, and density measurements. The results indicate a continuous improvement in stiffness, with the Young's modulus increasing from 2 GPa to 3.67 GPa when the fiber content reached 20%. Tensile strength reached a maximum value of 62 MPa at a fiber content of 15%, before decreasing, suggesting an optimal concentration. This study confirms that palm fibers can serve as durable and effective reinforcements for optimized composite designs.

Zitieren

APA

Rakrouk, A., Lammari, L., Issami, I., Khlifa, S. B., Moueddeb, K. E., & Nasri, R. (2026). Optimization of the Mechanical Properties of Epoxy–Palm Fiber Composites Using a Simplex Experimental Design. Journal of Building Material Science, 37-47. https://doi.org/10.30564/jbms.v8i3.13431

Vancouver

Rakrouk A, Lammari L, Issami I, Khlifa SB, Moueddeb KE, Nasri R. Optimization of the Mechanical Properties of Epoxy–Palm Fiber Composites Using a Simplex Experimental Design. Journal of Building Material Science. 2026:37-47. doi:10.30564/jbms.v8i3.13431

BibTeX
@article{Rakrouk2026,
  author = {Rakrouk, Ali and Lammari, Ltaief and Issami, Ikram and Khlifa, Sana Ben and Moueddeb, Khaled El and Nasri, Rachi},
  title = {Optimization of the Mechanical Properties of Epoxy–Palm Fiber Composites Using a Simplex Experimental Design},
  journal = {Journal of Building Material Science},
  year = {2026},
  pages = {37--47},
  doi = {10.30564/jbms.v8i3.13431}
}
Kostenlos starten →