EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties of Mullite Investigated by Nanoindentation

Jovana Ružić, Jelena Maletaškić, Željko Radovanović, Svetlana Ilić

Metallurgical and Materials Data · 2024

DOI: 10.30544/mmd29 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical and Materials Data, 2024. Verfasst von Jovana Ružić und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical behavior of sintered mullite material was studied using nanoindentation tests. Mullite compact was obtained by cold pressing sol-gel synthesized mullite precursor powder and sintering at 1550 °C. Analysis of the microstructural parameters and phase composition was done by XRD (X-ray diffraction) and SEM-EDS (scanning electron microscopy with energy dispersive X-ray spectrometry). A Berkovich indenter was employed for nanoindentation measurements at various loads (1000-9000 µN). After each test, in situ SPM (scanning probe microscopy) imaging was performed. The XRD pattern of sintered mullite displayed peaks of mullite (93.3%) and corundum (6.7%). Results revealed average values of hardness and elastic modulus of sintered mullite as 15.55 GPa and 174.37 GPa, respectively. Moreover, nanoindentation results indicated that mullite follows the Hall-Petch hardening relation due to the presence of grains with a size range of 0.2-2 µm. Indentation in areas with smaller grains exhibits higher hardness values. Post-test SPM images disclosed the presence of pile-ups around the indents, which were formed under loads higher than 3000 µN.

Zitieren

APA

Ružić, J., Maletaškić, J., Radovanović, Ž., & Ilić, S. (2024). Mechanical Properties of Mullite Investigated by Nanoindentation. Metallurgical and Materials Data. https://doi.org/10.30544/mmd29

Vancouver

Ružić J, Maletaškić J, Radovanović Ž, Ilić S. Mechanical Properties of Mullite Investigated by Nanoindentation. Metallurgical and Materials Data. 2024. doi:10.30544/mmd29

BibTeX
@article{Rui2024,
  author = {Ružić, Jovana and Maletaškić, Jelena and Radovanović, Željko and Ilić, Svetlana},
  title = {Mechanical Properties of Mullite Investigated by Nanoindentation},
  journal = {Metallurgical and Materials Data},
  year = {2024},
  doi = {10.30544/mmd29}
}
Kostenlos starten →