Effect of film thickness on the structural and tribo-mechanical properties of reactive sputtered molybdenum nitride thin films
Metallurgical and Materials Engineering · 2022
DOI: 10.30544/823 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metallurgical and Materials Engineering, 2022. Verfasst von Abdelaziz Abboudi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The current study aims to examine the impact of nitrogen content and film thickness on the structural and tribo-mechanical characteristics of reactive sputtered MoN thin films. Molybdenum nitride thin films with thicknesses ranging from 0.2 to 1.25 m have been applied to steel and silicon substrates for this purpose, with various amounts of controlled atmosphere (Ar+N2). Then, the films are characterized using XRD (X-ray diffraction), EDX (energy dispersive X-ray analysis), SEM (scanning electron microscopy), FTIR (Fourier-transform infrared spectroscopy), and nanoindentation. The residual stress was measured using the Stoney formula. Results show that a high compressive residual stress of -5.7 GPa is present in the film with a 0.3 μm thickness and gradually decreases with increasing film thickness. Above 1 µm of film thickness, there is no change in the density of the MoN films. Also, the coating hardness and Young’s modulus vary between 9.5 and 35 GPa, and 266 and 320 GPa, respectively, depending on nitrogen content and film thickness. Lastly, the friction of the MoN thin films is estimated to be around 0.55, which proves that the oxide is being slowly removed.
Zitieren
APA
Abboudi, A., Aissani, L., Saoudi, A., & Djebaili, H. (2022). Effect of film thickness on the structural and tribo-mechanical properties of reactive sputtered molybdenum nitride thin films. Metallurgical and Materials Engineering. https://doi.org/10.30544/823
Vancouver
Abboudi A, Aissani L, Saoudi A, Djebaili H. Effect of film thickness on the structural and tribo-mechanical properties of reactive sputtered molybdenum nitride thin films. Metallurgical and Materials Engineering. 2022. doi:10.30544/823
BibTeX
@article{Abboudi2022,
author = {Abboudi, Abdelaziz and Aissani, Linda and Saoudi, Abdenour and Djebaili, Hamid},
title = {Effect of film thickness on the structural and tribo-mechanical properties of reactive sputtered molybdenum nitride thin films},
journal = {Metallurgical and Materials Engineering},
year = {2022},
doi = {10.30544/823}
}
EUVIMED