EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sandwich composite of aluminum alloy and magnesium alloy through accumulative roll bonding technique

J Aishwarya, M. Nithin Kumaar, Vaira Vignesh Ramalingam, M Govindaraju

Metallurgical and Materials Engineering · 2022

DOI: 10.30544/761 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical and Materials Engineering, 2022. Verfasst von J Aishwarya und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum and magnesium alloys are lightweight materials with outstanding technical uses. Due to their combined qualities, composites built of aluminum and magnesium alloys have surpassed the utilization of these elements individually. Accumulative Roll Bonding was used to create a three-layered sandwich composite structure made of Al-alloy/Mg-alloy/Al-alloy. The composite structure's microstructure and mechanical characteristics were studied. A fine-grained AZ31 layer was formed, according to the microstructural study. At the Al-alloy/Mg-alloy contact, a diffusion layer was also seen. On the broken surface, fractography exhibited both ductile and brittle failure characteristics.

Zitieren

APA

Aishwarya, J., Kumaar, M. N., Ramalingam, V. V., & Govindaraju, M. (2022). Sandwich composite of aluminum alloy and magnesium alloy through accumulative roll bonding technique. Metallurgical and Materials Engineering. https://doi.org/10.30544/761

Vancouver

Aishwarya J, Kumaar MN, Ramalingam VV, Govindaraju M. Sandwich composite of aluminum alloy and magnesium alloy through accumulative roll bonding technique. Metallurgical and Materials Engineering. 2022. doi:10.30544/761

BibTeX
@article{Aishwarya2022,
  author = {Aishwarya, J and Kumaar, M. Nithin and Ramalingam, Vaira Vignesh and Govindaraju, M},
  title = {Sandwich composite of aluminum alloy and magnesium alloy through accumulative roll bonding technique},
  journal = {Metallurgical and Materials Engineering},
  year = {2022},
  doi = {10.30544/761}
}
Kostenlos starten →