Endothermic solvent extraction of copper (II) with furfuryl thioalcohol from sulfate medium
Metallurgical and Materials Engineering · 2022
DOI: 10.30544/758 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metallurgical and Materials Engineering, 2022. Verfasst von Umrao Bhagwan Shep und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A simple solvent extraction method was developed to extract copper (II) from sulfate solution. The extraction of copper (II) with furfuryl thioalcohol was investigated. The effect of variables such as aqueous phase pH, furfuryl thioalcohol concentration, temperature, stripping reagents, and diluents was investigated. The extraction data revealed that using 15% (v/v) furfuryl thioalcohol with aqueous solution containing 0.5 mol L-1 Na2SO4, equilibrium pH 5.5, and phase ratio organic phase: aqueous phase (O:A) of 1:1 resulted in 98.20 percent extraction of copper (II) without nickel coextraction (II). Extraction isotherm results show that the extraction procedure is endothermic, with ΔH = 28.542 kJ mol-1 and ΔS = 41.740 J K-1 mol-1. Using 2.0 M H2SO4, copper loaded in organic phase was stripped at a rate greater than 99 percent.
Zitieren
APA
Shep, U. B., Kondre, J. M., Shep, P. A., Arbad, B., & Kalalawe, V. (2022). Endothermic solvent extraction of copper (II) with furfuryl thioalcohol from sulfate medium. Metallurgical and Materials Engineering. https://doi.org/10.30544/758
Vancouver
Shep UB, Kondre JM, Shep PA, Arbad B, Kalalawe V. Endothermic solvent extraction of copper (II) with furfuryl thioalcohol from sulfate medium. Metallurgical and Materials Engineering. 2022. doi:10.30544/758
BibTeX
@article{Shep2022,
author = {Shep, Umrao Bhagwan and Kondre, Jivan M and Shep, Pratap A and Arbad, Balasaheb and Kalalawe, Virbhadra},
title = {Endothermic solvent extraction of copper (II) with furfuryl thioalcohol from sulfate medium},
journal = {Metallurgical and Materials Engineering},
year = {2022},
doi = {10.30544/758}
}
EUVIMED