EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Manufacturing Porcelain Covered BY (UPE/ Silica Fume) Gelcoat

Ame J. Abbas, Widad H. Jassim

Ibn AL-Haitham Journal For Pure and Applied Sciences · 20.04.2026 · 39 (2) · 138-149

DOI: 10.30526/39.2.4309 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ibn AL-Haitham Journal For Pure and Applied Sciences, online erschienen am 20.04.2026. Verfasst von Ame J. Abbas und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Industrial porcelain and gelcoat samples were prepared. Two kinds of porcelain, soft and hard, have been prepared by adding the hardener with concentrations of 2.5% and 5% gm, respectively. unsaturated polyester that is reinforced with calcium carbonate (CaCO₃) with equal values. Also, a gelcoat was prepared using unsaturated polyester and silica fume (S.F.) that was added in different weight ratios (0.25, 0.5, 0.75, 1%). The mechanical and thermal properties of porcelain and gelcoat samples were studied; also, water uptake has been determined. The hardness values of soft porcelain and hard porcelain are 53 and 49, respectively, while the hardness value increased to a higher value (81.5) for selected gelcoat (UPE / 0.5% S.F). The impact strength values of soft and hard porcelain are 2.3332 kJ/m² and 2.666 kJ/m², respectively, and improved to a higher value (4.3 kJ/m²) by using gelcoat. Finally, a gelcoat improves the resistance to water diffusion for both types of porcelain after immersing in water for seven days

Zitieren

APA

Abbas, A. J., & Jassim, W. H. (2026). Manufacturing Porcelain Covered BY (UPE/ Silica Fume) Gelcoat. Ibn AL-Haitham Journal For Pure and Applied Sciences, 39(2), 138-149. https://doi.org/10.30526/39.2.4309

Vancouver

Abbas AJ, Jassim WH. Manufacturing Porcelain Covered BY (UPE/ Silica Fume) Gelcoat. Ibn AL-Haitham Journal For Pure and Applied Sciences. 2026;39(2):138-149. doi:10.30526/39.2.4309

BibTeX
@article{Abbas2026,
  author = {Abbas, Ame J. and Jassim, Widad H.},
  title = {Manufacturing Porcelain Covered BY (UPE/ Silica Fume) Gelcoat},
  journal = {Ibn AL-Haitham Journal For Pure and Applied Sciences},
  year = {2026},
  volume = {39},
  number = {2},
  pages = {138--149},
  doi = {10.30526/39.2.4309}
}
Kostenlos starten →