Effect of Nd: YAG Laser on Hardness and Color Change of High Impact Acrylic Denture Base Material
Ibn AL-Haitham Journal For Pure and Applied Sciences · 20.04.2026 · 39 (2) · 51-58
DOI: 10.30526/39.2.4218 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ibn AL-Haitham Journal For Pure and Applied Sciences, online erschienen am 20.04.2026. Verfasst von Noor D. Majeed und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Polymethyl methacrylate (PMMA) is widely used for denture bases but suffers from limited fracture resistance; high impact acrylic, enhanced with butadiene styrene rubber, improves strength. Lasers, particularly the Nd: YAG type, have been used to modify acrylic surfaces, mainly to enhance bonding with soft liners; however, little is known about the effect of Nd: YAG laser treatment on other properties like hardness and color, which are critical for clinical performance and esthetics. The study objective was to evaluate the effect of nanosecond pulsed Nd: YAG laser irradiation with two different hatch values on the hardness and color of high-impact acrylic denture base material. Fifty acrylic samples were made and divided into three groups: untreated control, laser-treated at 0.03 mm hatch (H3), and laser-treated at 0.05 mm hatch (H5). Hardness was measured using a Shore D durometer, and color changes were evaluated with a digital colorimeter using the CIELab system; chemical surface analysis was conducted by FTIR spectroscopy. Statistical analysis included ANOVA and independent t-tests, with a significance level at p ≤ 0.05. The results of FTIR spectra showed no chemical changes in acrylic after laser treatment, and hardness values did not differ significantly among groups (p > 0.05); however, laser treatment resulted in a significant color change, with ΔE values corresponding to a “much” perceptible color difference, which may compromise esthetics (p ≤ 0.05). In conclusion, Nd: YAG laser treatment does not alter the chemical structure or hardness of high-impact acrylic denture base material but induces significant color changes that could adversely affect esthetic outcomes
Zitieren
APA
Majeed, N. D., & Khalaf, B. S. (2026). Effect of Nd: YAG Laser on Hardness and Color Change of High Impact Acrylic Denture Base Material. Ibn AL-Haitham Journal For Pure and Applied Sciences, 39(2), 51-58. https://doi.org/10.30526/39.2.4218
Vancouver
Majeed ND, Khalaf BS. Effect of Nd: YAG Laser on Hardness and Color Change of High Impact Acrylic Denture Base Material. Ibn AL-Haitham Journal For Pure and Applied Sciences. 2026;39(2):51-58. doi:10.30526/39.2.4218
BibTeX
@article{Majeed2026,
author = {Majeed, Noor D. and Khalaf, Bayan S.},
title = {Effect of Nd: YAG Laser on Hardness and Color Change of High Impact Acrylic Denture Base Material},
journal = {Ibn AL-Haitham Journal For Pure and Applied Sciences},
year = {2026},
volume = {39},
number = {2},
pages = {51--58},
doi = {10.30526/39.2.4218}
}
EUVIMED