EUVIMEDEUVIMED entdecken
Crossref

Handheld Laser Beam Welding Characterization: Caustic Profiling and Power Metering

IVAN PIGOZZO, JOSE ROCHA, NITHEESH RAMASAMY, PATRICIO MENDEZ, MITCHELL GRAMS, DOUG HAMRE

Welding Journal · 01.03.2026 · 105 (3) · 74s-82s

DOI: 10.29391/2026.105.006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Welding Journal, online erschienen am 01.03.2026. Verfasst von IVAN PIGOZZO und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work focused on profiling the caustic and measuring the power of a handheld laser beam welding (HLBW) system. A Primes® FocusMonitor FM+ and PowerMonitor CPM-F-10 were used to characterize a Miller OptXTM 2 kW HLBW system. Spot size and power density are key process variables for laser beam welding. For HLBW, these variables are constantly subject to variations since they depend on the welder’s experience and the ability to maintain a steady torch position. In this context, accurate characterization of the laser beam becomes essential to HLBW procedures. Laser beam profiling routines were performed using four different beam powers, while the power was measured in the entire adjustable range. The beam exhibited a waist diameter of approximately 40 𝜇m, a Rayleigh length of 1.1 mm, and a divergence angle of 40.3 mrad. The average beam parameter product and M2 were 0.44 mm mrad and 1.3, respectively. The measured power output was consistently 4% above the nominal value across the entire power range. The results confirmed that beam geometry is sensitive to torch positioning due to the small spot size and short Rayleigh length. The proposed methodology yielded consistent results for beam characteristics and power output in HLBW systems.

Zitieren

APA

PIGOZZO, I., ROCHA, J., RAMASAMY, N., MENDEZ, P., GRAMS, M., & HAMRE, D. (2026). Handheld Laser Beam Welding Characterization: Caustic Profiling and Power Metering. Welding Journal, 105(3), 74s-82s. https://doi.org/10.29391/2026.105.006

Vancouver

PIGOZZO I, ROCHA J, RAMASAMY N, MENDEZ P, GRAMS M, HAMRE D. Handheld Laser Beam Welding Characterization: Caustic Profiling and Power Metering. Welding Journal. 2026;105(3):74s-82s. doi:10.29391/2026.105.006

BibTeX
@article{PIGOZZO2026,
  author = {PIGOZZO, IVAN and ROCHA, JOSE and RAMASAMY, NITHEESH and MENDEZ, PATRICIO and GRAMS, MITCHELL and HAMRE, DOUG},
  title = {Handheld Laser Beam Welding Characterization: Caustic Profiling and Power Metering},
  journal = {Welding Journal},
  year = {2026},
  volume = {105},
  number = {3},
  pages = {74s--82s},
  doi = {10.29391/2026.105.006}
}
Kostenlos starten →