Computational Optimization of Nanomaterial Sensors for Explosive Detection: A Multi-Parameter Study of Selectivity and Environmental Stability
Journal of Forensic Science and Research · 10.03.2026 · 015-025
DOI: 10.29328/journal.jfsr.1001111 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Forensic Science and Research, online erschienen am 10.03.2026. Verfasst von Amna Arooj und 6 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Trace explosive residue detection is still an important and pressing issue in security scanning, forensic science, and anti-terrorism missions. In this paper, a thorough comparative simulation analysis of four nanomaterial-based sensor technologies, namely Single-Walled Carbon Nanotubes (SWCNT), Multi-Walled Carbon Nanotubes (MWCNT), reduced Graphene Oxide (rGO), and Zinc Oxide Nanowires (ZnO NW), for the detection of three major explosive materials: 2,4,6-Trinitrotoluene (TNT), cyclotrimethylenetrinitramine (RDX), and Triacetone Triperoxide (TATP), is conducted. Based on simulation parameters obtained from 47 peer-reviewed articles (2020-2024), the performance of the sensors was assessed for 108 experimental settings, including different temperatures (10°C, 25°C, 40°C) and humidity conditions (30%, 60%, 90%). The results showed that each nanomaterial has its own unique strengths : ZnO nanowires had the highest sensitivity (0.2 ng/mL LOD) and selectivity (95%) for TNT detection, rGO sensors outperformed in TATP detection (0.4 ng/mL LOD, 93% selectivity) and were highly resistant to environmental conditions (92% signal retention at 90% RH), MWCNT sensors had well-rounded performance for multiple types of explosives (83.3% average selectivity), and SWCNT sensors had fast response times (25 seconds) but poor humidity tolerance. The overall performance ranking revealed rGO as the best-performing material (score: 35.8/40), followed by MWCNT (score: 29.3/40). The results obtained suggest that the optimal sensor choice is application-dependent and not generalizable, thus facilitating the design of multi-sensor array systems that can harness the unique advantages of various nanomaterial platforms for improved explosive detection capabilities.
Zitieren
APA
Arooj, A., Rheman, H. U., Malik, H. M. A., Irshad, M., Ramzan, J., Sohail, M. B., & Arooj, T. (2026). Computational Optimization of Nanomaterial Sensors for Explosive Detection: A Multi-Parameter Study of Selectivity and Environmental Stability. Journal of Forensic Science and Research, 015-025. https://doi.org/10.29328/journal.jfsr.1001111
Vancouver
Arooj A, Rheman HU, Malik HMA, Irshad M, Ramzan J, Sohail MB, et al. Computational Optimization of Nanomaterial Sensors for Explosive Detection: A Multi-Parameter Study of Selectivity and Environmental Stability. Journal of Forensic Science and Research. 2026:015-025. doi:10.29328/journal.jfsr.1001111
BibTeX
@article{Arooj2026,
author = {Arooj, Amna and Rheman, Hifz Ur and Malik, Hafiz Muhammad Abbas and Irshad, Mudassar and Ramzan, Javairia and Sohail, Muhammad Bin and Arooj, Tayyaba},
title = {Computational Optimization of Nanomaterial Sensors for Explosive Detection: A Multi-Parameter Study of Selectivity and Environmental Stability},
journal = {Journal of Forensic Science and Research},
year = {2026},
pages = {015--025},
doi = {10.29328/journal.jfsr.1001111}
}
EUVIMED