EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

THE EFFECT OF DEPOSITION TEMPERATURE ON Cu2ZnSnS4 (CZTS) THIN FILMS GROWN BY DC MAGNETRON SPUTTERING

Fianti Fianti, Shila Artha Mulia, Nabila Rizkina Sari, Siti Firdhosiyah, Budi Astuti, Putut Marwoto, Kyoo Ho Kim, Muhammad Ikhlasul Amal, Ersan Yudhapratama Muslih

Indonesian Physical Review · 04.03.2026 · 9 (2) · 159-175

DOI: 10.29303/ipr.v9i2.616 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Indonesian Physical Review, online erschienen am 04.03.2026. Verfasst von Fianti Fianti und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu₂ZnSnS₄ thin films were successfully deposited on soda lime glass substrates using the DC Magnetron Sputtering method at a plasma power of 42 W, an argon gas pressure of 500 mTorr, and deposition temperatures ranging from 27 °C to 400 °C for 7 hours, using a Cu₂ZnSnS₄ target with 99% purity. The effect of varying temperatures was characterized by using X-ray Diffraction (XRD) to determine the film structure, Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy (SEM-EDX) to analyze morphology and composition, and UV-Vis-NIR spectrophotometry to evaluate optical properties. Film composition showed non-stoichiometric characteristics, with elemental ranges of Cu (20.66–32.81) %, Zn (14.08–25.67) %, Sn (21.87–37.05) %, and S (25.42–31.22) %. All samples exhibited a Cu/(Zn+Sn) ratio of less than 1, indicating Cu-poor compositions typical of p-type semiconductors. XRD analysis revealed that the formation of the Cu₂ZnSnS₄ phase began at a deposition temperature of 100 °C, while stable kesterite Cu₂ZnSnS₄ crystals were obtained at 400 °C, corresponding to the (112) crystal plane. The absorption coefficients and band gap energies ranged from 10⁴ to 10⁵ cm ¹ and from 1.34 to 2.175 eV, respectively, confirming the suitability of the films for solar cell applications. SEM observations indicated that higher deposition temperature promoted more successful grain growth. Overall, higher deposition temperatures yield better Cu₂ZnSnS₄ thin films.

Zitieren

APA

Fianti, F., Mulia, S. A., Sari, N. R., Firdhosiyah, S., Astuti, B., Marwoto, P., Kim, K. H., Amal, M. I., & Muslih, E. Y. (2026). THE EFFECT OF DEPOSITION TEMPERATURE ON Cu2ZnSnS4 (CZTS) THIN FILMS GROWN BY DC MAGNETRON SPUTTERING. Indonesian Physical Review, 9(2), 159-175. https://doi.org/10.29303/ipr.v9i2.616

Vancouver

Fianti F, Mulia SA, Sari NR, Firdhosiyah S, Astuti B, Marwoto P, et al. THE EFFECT OF DEPOSITION TEMPERATURE ON Cu2ZnSnS4 (CZTS) THIN FILMS GROWN BY DC MAGNETRON SPUTTERING. Indonesian Physical Review. 2026;9(2):159-175. doi:10.29303/ipr.v9i2.616

BibTeX
@article{Fianti2026,
  author = {Fianti, Fianti and Mulia, Shila Artha and Sari, Nabila Rizkina and Firdhosiyah, Siti and Astuti, Budi and Marwoto, Putut and Kim, Kyoo Ho and Amal, Muhammad Ikhlasul and Muslih, Ersan Yudhapratama},
  title = {THE EFFECT OF DEPOSITION TEMPERATURE ON Cu2ZnSnS4 (CZTS) THIN FILMS GROWN BY DC MAGNETRON SPUTTERING},
  journal = {Indonesian Physical Review},
  year = {2026},
  volume = {9},
  number = {2},
  pages = {159--175},
  doi = {10.29303/ipr.v9i2.616}
}
Kostenlos starten →