EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

THE EFFECT OF NICKEL ELECTROPLATING ON THE SURFACE HARDNESS OF LOW CARBON STEEL

Salman, Ardi Wiranata, Sinarep, Paryanto Dwi Setyawan

Energy, Materials and Product Design · 2022

DOI: 10.29303/empd.v1i2.1495 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy, Materials and Product Design, 2022. Verfasst von Salman und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electroplating on steel is basically done with the aim of protecting the steel surface from corrosion attack. However, it is necessary to know the quality surface hardness of steel that has undergone electroplating. This research is determining the electroplating time and the best anode and cathode distance to surface hardness in the nickel electroplating process on low carbon steel. The method was done by placing the specimen into a electrolyte solution. Then the hardness test was carried out on the specimen. The results shown that the ST-37 steel coating with nickel with a variation of the plating time of 12 minutes and the distance between the anode and cathode of 150mm,has highest hardness number of 246.7kg/mm2. By ANOVA analysis the coating time greatly affects the surface hardness.

Zitieren

APA

Salman, Wiranata, A., Sinarep, & Setyawan, P. D. (2022). THE EFFECT OF NICKEL ELECTROPLATING ON THE SURFACE HARDNESS OF LOW CARBON STEEL. Energy, Materials and Product Design. https://doi.org/10.29303/empd.v1i2.1495

Vancouver

Salman, Wiranata A, Sinarep, Setyawan PD. THE EFFECT OF NICKEL ELECTROPLATING ON THE SURFACE HARDNESS OF LOW CARBON STEEL. Energy, Materials and Product Design. 2022. doi:10.29303/empd.v1i2.1495

BibTeX
@article{Salman2022,
  author = {Salman and Wiranata, Ardi and Sinarep and Setyawan, Paryanto Dwi},
  title = {THE EFFECT OF NICKEL ELECTROPLATING ON THE SURFACE HARDNESS OF LOW CARBON STEEL},
  journal = {Energy, Materials and Product Design},
  year = {2022},
  doi = {10.29303/empd.v1i2.1495}
}
Kostenlos starten →