A Low-Cost TSV Fabrication Strategy Combining Laser Drilling and Chemical Polishing
Journal of Integrated Circuits and Systems · 13.04.2026 · 21 (1) · 1-8
DOI: 10.29292/jics.v21i1.1154 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Integrated Circuits and Systems, online erschienen am 13.04.2026. Verfasst von Fernando Cesar Rufino und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
An alternative approach for through-silicon via (TSV) fabrication was developed using laser drilling, chemical polishing, and TiN deposition by dc magnetron sputtering. The process was optimized by adjusting the laser parameters, and the best results were obtained at a pulse repetition frequency of 1 kHz, where drilling was stable and the via walls exhibited reduced thermal damage. Two laser exposure modes were compared: single-pass and six-pass. The six-pass condition produced smoother surfaces, attributed to a cleaning effect between consecutive irradiations, although an hourglass-shaped profile was observed. Raman spectroscopy confirmed that the laser process did not modify the silicon crystalline structure, while chemical polishing introduced slight compressive stress on the TSV surfaces. TiN films deposited on both wafer sides exhibited continuous and conformal coverage, with an average thickness of 190 nm. Moreover, increasing the wafer thickness to 530 µm resulted in a more cylindrical via geometry, which is advantageous for metallization and 3D interconnect uniformity. The proposed route provides a low-cost and reliable alternative for TSV fabrication, yielding sidewall quality compatible with 3D integration and quantum-computing interconnect applications.
Zitieren
APA
Rufino, F. C., Alaferdov, A., Espindola, L. C. J., Silva, A. R., Leite, F. I. D. L., & Diniz, J. A. (2026). A Low-Cost TSV Fabrication Strategy Combining Laser Drilling and Chemical Polishing. Journal of Integrated Circuits and Systems, 21(1), 1-8. https://doi.org/10.29292/jics.v21i1.1154
Vancouver
Rufino FC, Alaferdov A, Espindola LCJ, Silva AR, Leite FIDL, Diniz JA. A Low-Cost TSV Fabrication Strategy Combining Laser Drilling and Chemical Polishing. Journal of Integrated Circuits and Systems. 2026;21(1):1-8. doi:10.29292/jics.v21i1.1154
BibTeX
@article{Rufino2026,
author = {Rufino, Fernando Cesar and Alaferdov, Andrei and Espindola, Luana Carvalho Jayme and Silva, Audrey Roberto and Leite, Fernando Idalírio de Lima and Diniz, José Alexandre},
title = {A Low-Cost TSV Fabrication Strategy Combining Laser Drilling and Chemical Polishing},
journal = {Journal of Integrated Circuits and Systems},
year = {2026},
volume = {21},
number = {1},
pages = {1--8},
doi = {10.29292/jics.v21i1.1154}
}
EUVIMED