EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Thermal Noise Characterization of InAsxSb1-x Ultra-thin body MOSFET Devices in Nano Scale Regime

Sunipa Roy, Palasri Dhar, Swagata Bhattacharjee

Journal of Integrated Circuits and Systems · 12.04.2026 · 21 (1) · 1-8

DOI: 10.29292/jics.v21i1.1075 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Integrated Circuits and Systems, online erschienen am 12.04.2026. Verfasst von Sunipa Roy und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work examines how device scaling influences the thermal noise performances of InAsxSb1-x n-channel ultra-thin body metal oxide semiconductor (UTB-MOS) for varied lengths of channel, thicknesses of channel, and thicknesses of insulating layer for varying both the gate voltages and the frequencies. To validate the current model, the simulated gate transfer characteristics graph is compared with published experimental results. Based on transconductance (gm) and drain current (ID) simulation results, minimum noise figure (NFmin) , noise resistance (Rn), and the drain current noise spectral density (SID/ID²) were determined. According to our findings, thermal noise in InAsxSb1-x n-channel MOSFETs is dependent on device parameters and can be reduced via suitable device scaling the length of the channel, thickness of channel and thickness of insulator. When the channel length was decremented from 0.1 µm to 0.04 µm at 1V of gate voltage a 0.75 kΩ decrement in noise resistance is achieved . The channel length decrement also yields a power spectral density of roughly 2.2×10⁻²⁴ Hz⁻¹ and a minimum noise figure of roughly 1.3dB .Further improvements were observed with a reduction in channel thickness. Specifically, noise resistance and power spectral density values are significantly lowered when the channel thickness was decreased from 0.1 µm to 0.04 µm at the same gate voltage. A comparative study of the Noise conductance and Input referred noise with respect to frequency for different channel thickness and insulator thickness are calculated and found that the values of Noise conductance and Input referred noise decreases with increment in channel thickness and insulator thickness.

Zitieren

APA

Roy, S., Dhar, P., & Bhattacharjee, S. (2026). Thermal Noise Characterization of InAsxSb1-x Ultra-thin body MOSFET Devices in Nano Scale Regime. Journal of Integrated Circuits and Systems, 21(1), 1-8. https://doi.org/10.29292/jics.v21i1.1075

Vancouver

Roy S, Dhar P, Bhattacharjee S. Thermal Noise Characterization of InAsxSb1-x Ultra-thin body MOSFET Devices in Nano Scale Regime. Journal of Integrated Circuits and Systems. 2026;21(1):1-8. doi:10.29292/jics.v21i1.1075

BibTeX
@article{Roy2026,
  author = {Roy, Sunipa and Dhar, Palasri and Bhattacharjee, Swagata},
  title = {Thermal Noise Characterization of InAsxSb1-x Ultra-thin body MOSFET Devices in Nano Scale Regime},
  journal = {Journal of Integrated Circuits and Systems},
  year = {2026},
  volume = {21},
  number = {1},
  pages = {1--8},
  doi = {10.29292/jics.v21i1.1075}
}
Kostenlos starten →