Effect of Starch Addition on Porosity in Reaction Sintering of Alumina and Magnesia
JOURNAL OF CHARACTERIZATION · 2021
DOI: 10.29228/jchar.55662 ↗Kurz gefasst
Fachartikel in der Zeitschrift JOURNAL OF CHARACTERIZATION, 2021. Verfasst von Melih Özçatal und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Porous magnesium aluminate ceramics were produced with a sintering process of α-Al2O3 and MgO. Up to 20% by weight of corn starch were used as a pore-forming agent. Pellets were prepared by powder metallurgy technique and produced by solid-state sintering route. The porosity of the sintered pellets was characterized with and without adding corn starch, respectively. In particular, the effects of corn starch additive on density, porosity, and microstructure were investigated. Almost full density was obtained in the samples without starch addition. The study results showed that corn starch addition increased the porosity of the sintered samples. Maximum porosity of 47.86 % was achieved with the addition of 20 wt. % corn starch of 1400°C sintering temperature.
Zitieren
APA
Özçatal, M., Başpınar, M. S., & Çiftçi, H. (2021). Effect of Starch Addition on Porosity in Reaction Sintering of Alumina and Magnesia. JOURNAL OF CHARACTERIZATION. https://doi.org/10.29228/jchar.55662
Vancouver
Özçatal M, Başpınar MS, Çiftçi H. Effect of Starch Addition on Porosity in Reaction Sintering of Alumina and Magnesia. JOURNAL OF CHARACTERIZATION. 2021. doi:10.29228/jchar.55662
BibTeX
@article{zatal2021,
author = {Özçatal, Melih and Başpınar, M. S. and Çiftçi, Hakan},
title = {Effect of Starch Addition on Porosity in Reaction Sintering of Alumina and Magnesia},
journal = {JOURNAL OF CHARACTERIZATION},
year = {2021},
doi = {10.29228/jchar.55662}
}
EUVIMED