Effect of solvent type and number of coating layers on the contact angle of hydrophilic TiO2 thin film
JOURNAL OF CHARACTERIZATION · 2021
DOI: 10.29228/jchar.55618 ↗Kurz gefasst
Fachartikel in der Zeitschrift JOURNAL OF CHARACTERIZATION, 2021. Verfasst von Atilla Evcin und 1 weiteren Autor:innen.
Abstract (Originalsprache)
In this study, titanium isopropoxide was chosen as a precursor. It was dissolved in isopropanol for 30 minutes. Then non-ionic surfactants (Triton X-100), were used to obtain the separation and mono dispersion in the sol-gel reaction. In this experiment, the dip-coating method was chosen as a coating method. Soda-lime glass substrates were coated with the alkoxide-based coating solution by a dip coater. The coated films were dried at 80 °C in an oven to allow the alcohol, organic solvent, and excess water to evaporate from the films. After evaporation of solvents, coated glasses were characterized by scanning electron microscopy (SEM), goniometer, light Transmittance/Haze meter, and Gloss meter. The hydrophilic surface was successfully obtained from titanium alkoxide-based coating solution.
Zitieren
APA
Evcin, A., & Yaşar, E. (2021). Effect of solvent type and number of coating layers on the contact angle of hydrophilic TiO2 thin film. JOURNAL OF CHARACTERIZATION. https://doi.org/10.29228/jchar.55618
Vancouver
Evcin A, Yaşar E. Effect of solvent type and number of coating layers on the contact angle of hydrophilic TiO2 thin film. JOURNAL OF CHARACTERIZATION. 2021. doi:10.29228/jchar.55618
BibTeX
@article{Evcin2021,
author = {Evcin, Atilla and Yaşar, Emine},
title = {Effect of solvent type and number of coating layers on the contact angle of hydrophilic TiO2 thin film},
journal = {JOURNAL OF CHARACTERIZATION},
year = {2021},
doi = {10.29228/jchar.55618}
}
EUVIMED