Experimental Studies of Deflections in Reinforced Concrete Beams Subjected to Bending: Mathematical Models
Inżynieria Mineralna · 01.11.2026 · 2 (1)
DOI: 10.29227/im-2026-02-01-059 ↗Kurz gefasst
Fachartikel in der Zeitschrift Inżynieria Mineralna, online erschienen am 01.11.2026. Verfasst von Ivan Ivanchev. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In reinforced concrete structural elements, it is necessary to limit and not allow excessive deformations from service loads. Excessive deflections and cracks with unacceptably large widths can disrupt the normal functioning of reinforced concrete structures, make building occupants feel uncomfortable, and disrupt the aesthetic appearance of buildings or facilities under service conditions, even if the stiffness and load - bearing capacity are sufficient. Limiting deflections is a mandatory step in structural design. The article analyzes a series of tests for the determination of deflections in reinforced concrete beams constructed of concrete without prestressing of the reinforcement. Approximating equations have been proposed to determine the vertical displacements and the displacements of the supports, the deflections have been calculated and compared with those obtained experimentally. A methodology is proposed for experimental determination of deflections at different load values for 12 reinforced concrete beams, grouped into 4 series, subjected to four - point bending test. The series differ in provided longitudinal bottom reinforcement, concrete cover and reinforcement ratio. The spans (3 m) are the same for all beams. Simultaneously, on the day of the beams' preparation, test specimens were also made from the same concrete mix. To determine the cylindrical compressive strength, tensile strength at splitting and modulus of elasticity of concrete, 24 cylindrical and 12 prismatic test specimens were prepared. To determine the strength and strain characteristics of the reinforcing steel, 3 test pieces of each diameter of the reinforcing bars used in reinforced concrete beams were tested. For experimental determination of vertical displacements at characteristic points of the beams, 5 inductive displacement transducers were used. The experiment was realized with a measuring complex for collecting, recording and processing the results, consisting of multi - channel measuring devices UPM 100 and Spider 8, a pressure sensor in the compression press, inductive displacement transducers and a computer configuration. The software products Catman Professional and Microsoft Excel were used to collect and process the results. For each beam, the cracking moment was determined theoretically and experimentally, which divides the development of deflection into 2 states. The location and outline of the first cracks in the region with constant bending moment and the cracks along the entire beams in stabilized crack formation stage are presented. The deflections at characteristic points of the reinforced concrete beams at different loading stages were investigated. The experimental dependences of displacements as a function of load are presented. Approximating equations were proposed and their accuracy was assessed using the parameter R 2 . The accuracy of the proposed functions was verified for each beam with the calculated relative errors.
Zitieren
APA
Ivanchev, I. (2026). Experimental Studies of Deflections in Reinforced Concrete Beams Subjected to Bending: Mathematical Models. Inżynieria Mineralna, 2(1). https://doi.org/10.29227/im-2026-02-01-059
Vancouver
Ivanchev I. Experimental Studies of Deflections in Reinforced Concrete Beams Subjected to Bending: Mathematical Models. Inżynieria Mineralna. 2026;2(1). doi:10.29227/im-2026-02-01-059
BibTeX
@article{Ivanchev2026,
author = {Ivanchev, Ivan},
title = {Experimental Studies of Deflections in Reinforced Concrete Beams Subjected to Bending: Mathematical Models},
journal = {Inżynieria Mineralna},
year = {2026},
volume = {2},
number = {1},
doi = {10.29227/im-2026-02-01-059}
}
EUVIMED