EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Efficiency Removal of Malachite Green Using Hydrothermally Synthesized MoS₂ Nanosheets

Ahlam S. Mohammed, Aula M. Al Hindawi

JOURNAL OF UNIVERSITY OF BABYLON for Pure and Applied Sciences · 30.09.2026 · 34 (3) · 440-457

DOI: 10.29196/jubpas.v34i3.6840 ↗

Kurz gefasst

Fachartikel in der Zeitschrift JOURNAL OF UNIVERSITY OF BABYLON for Pure and Applied Sciences, online erschienen am 30.09.2026. Verfasst von Ahlam S. Mohammed und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Molybdenum disulfide (MoS₂) nanosheets were prepared through hydrothermal technique in the presence of polyvinylpyrrolidone (PVP) was used as a stabilizing agent to regulate the size of the particles and to avoid agglomeration. The as-prepared MoS2 nanosheets were thoroughly characterized by transmission electron microscopy (TEM), field-emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and Brunauer Emmett Teller (BET) surface area analysis. The absorption spectrum of the UV came out with three distinct absorption bands- 634, 525 and 437 nm which are indicative of successful nanoscale formation and evolution. Quantum confinement effects and thinner layer thickness resulted in the optical band gap being determined as 1.77 eV, which is larger than that of bulk MoS2 (~1.2 eV). XRD was used to verify the formation of a few-layer hexagonal MoS2 nanocrystals, and the images of electron microscopy indicated the formation of nanosheet-like morphology with folded edges and pores. An adsorption behavior with malachite green (MG) dye indicated that when the dosage of adsorbent (0.02 g) was low and the test was established at 40 minute, the removal efficiencies were above 90.3%. The analysis of BET showed relatively high specific surface area and mesoporous structure, which played an important role in improving the performance of adsorption. This great adsorption activity is explained by the high specific surface area, high density of active sites and positive electrostatic interactions among the dye molecules and MoS2 surface. Thus, MoS2 nanosheets that are prepared using hydrothermal methods and stabilized with PVP can be deemed a promising and efficient adsorbent to be used in the treatment of wastewater.

Zitieren

APA

Mohammed, A. S., & Hindawi, A. M. A. (2026). High-Efficiency Removal of Malachite Green Using Hydrothermally Synthesized MoS₂ Nanosheets. JOURNAL OF UNIVERSITY OF BABYLON for Pure and Applied Sciences, 34(3), 440-457. https://doi.org/10.29196/jubpas.v34i3.6840

Vancouver

Mohammed AS, Hindawi AMA. High-Efficiency Removal of Malachite Green Using Hydrothermally Synthesized MoS₂ Nanosheets. JOURNAL OF UNIVERSITY OF BABYLON for Pure and Applied Sciences. 2026;34(3):440-457. doi:10.29196/jubpas.v34i3.6840

BibTeX
@article{Mohammed2026,
  author = {Mohammed, Ahlam S. and Hindawi, Aula M. Al},
  title = {High-Efficiency Removal of Malachite Green Using Hydrothermally Synthesized MoS₂ Nanosheets},
  journal = {JOURNAL OF UNIVERSITY OF BABYLON for Pure and Applied Sciences},
  year = {2026},
  volume = {34},
  number = {3},
  pages = {440--457},
  doi = {10.29196/jubpas.v34i3.6840}
}
Kostenlos starten →