EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis of Manganese Dioxide (MnO₂) Nanostructures Using a Modified Chemical Method as a Fluid Loss Control Additive for Water-Based Drilling Fluids (WBDF)

Ahmed Issa Naji Adam

JOURNAL OF UNIVERSITY OF BABYLON for Pure and Applied Sciences · 06.04.2026 · 34 (1) · 89-103

DOI: 10.29196/jubpas.v34i1.6367 ↗

Kurz gefasst

Fachartikel in der Zeitschrift JOURNAL OF UNIVERSITY OF BABYLON for Pure and Applied Sciences, online erschienen am 06.04.2026. Verfasst von Ahmed Issa Naji Adam. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Water-based drilling fluids (WBDFs) remain the most widely used drilling fluids because they are less expensive and more environmentally acceptable than oil-based and synthetic-based fluids. Their performance depends heavily on rheological and filtration characteristics, which are highly sensitive to the chemical additives incorporated into the mud. This study explores the influence of manganese dioxide (MnO₂) nanoparticles on the rheological behavior and filtration performance of WBDF. Materials and Methods: MnO₂ nanostructures were synthesized using a modified chemical route and characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) to confirm their crystalline phase, bonding structure, and morphology. WBDF samples were then prepared with and without MnO₂ nanoparticles. Key parameters, including plastic viscosity, yield point, density, filtrate volume, and mud cake thickness, were measured to assess the effect of nanoparticle incorporation.

Results

XRD analysis confirmed the formation of crystalline MnO₂, while FTIR spectra revealed strong Mn–O vibrations characteristic of MnO₂ structures. SEM imaging showed well-defined nanostructures suitable for fluid modification. Compared with the base WBDF, MnO₂ enhanced fluids demonstrated improved rheological stability, higher yield point and viscosity consistency, and a notable reduction in fluid loss. Additionally, mud cakes formed in the presence of MnO₂ exhibited reduced thickness and signs of structural modification, indicating improved sealing efficiency.

Conclusion

The addition of MnO₂ nanoparticles significantly enhances the rheological and filtration properties of WBDF. These improvements suggest that MnO₂-modified WBDF can effectively minimize filtrate invasion into formations and provide more stable drilling performance.

Zitieren

APA

Adam, A. I. N. (2026). Synthesis of Manganese Dioxide (MnO₂) Nanostructures Using a Modified Chemical Method as a Fluid Loss Control Additive for Water-Based Drilling Fluids (WBDF). JOURNAL OF UNIVERSITY OF BABYLON for Pure and Applied Sciences, 34(1), 89-103. https://doi.org/10.29196/jubpas.v34i1.6367

Vancouver

Adam AIN. Synthesis of Manganese Dioxide (MnO₂) Nanostructures Using a Modified Chemical Method as a Fluid Loss Control Additive for Water-Based Drilling Fluids (WBDF). JOURNAL OF UNIVERSITY OF BABYLON for Pure and Applied Sciences. 2026;34(1):89-103. doi:10.29196/jubpas.v34i1.6367

BibTeX
@article{Adam2026,
  author = {Adam, Ahmed Issa Naji},
  title = {Synthesis of Manganese Dioxide (MnO₂) Nanostructures Using a Modified Chemical Method as a Fluid Loss Control Additive for Water-Based Drilling Fluids (WBDF)},
  journal = {JOURNAL OF UNIVERSITY OF BABYLON for Pure and Applied Sciences},
  year = {2026},
  volume = {34},
  number = {1},
  pages = {89--103},
  doi = {10.29196/jubpas.v34i1.6367}
}
Kostenlos starten →