EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation of Corrugated Sheet Metal Forming and analysis of Its ‎Characteristics

Taif Ahmed Mussa

Journal of University of Babylon for Engineering Sciences · 31.08.2026 · 34 (3) · 80-101

DOI: 10.29196/jubes.v34i3.6732 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of University of Babylon for Engineering Sciences, online erschienen am 31.08.2026. Verfasst von Taif Ahmed Mussa. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this research, the numerical simulation of forming of AA6060 aluminum alloy corrugated sheets and also its structural performance after the forming process has been investigated by Abaqus/Explicit and FE-Safe software. The material flow, stress distribution and localized material thinning under the influence of punch velocity (0.44 m/s and 0.13 m/s) are evaluated. The results show that by lowering the velocity to 0.13 m/s structural defects are significantly reduced and localized thickness reduction is kept below 4 percent, while a thickness reduction was observed at 18 percent in the case of a velocity of 0.44 m/s. Three nominal thicknesses (2.5 mm, 5.0 mm and 7.5 mm) were used for the static yield testing of the formed profiles after the forming simulation. A non-linear relationship was obtained between load-bearing capacity and profile section modulus, from 25 kN to 91 kN, and thus, structural resistance is very sensitive to the profile section modulus. Besides, fatigue analysis was also conducted using the Stress-Life (S-N) criterion for crack initiation, to assess the cyclic load limit. The corrugated structure showed infinite life up to 4.9 million cycles with an 85 kN load, and a 200 kN load was the critical load for the structure. The quantitative results are useful for design guidance to optimize the forming quality and load-bearing capacity of lightweight corrugated parts in structural applications.

Zitieren

APA

Mussa, T. A. (2026). Simulation of Corrugated Sheet Metal Forming and analysis of Its ‎Characteristics. Journal of University of Babylon for Engineering Sciences, 34(3), 80-101. https://doi.org/10.29196/jubes.v34i3.6732

Vancouver

Mussa TA. Simulation of Corrugated Sheet Metal Forming and analysis of Its ‎Characteristics. Journal of University of Babylon for Engineering Sciences. 2026;34(3):80-101. doi:10.29196/jubes.v34i3.6732

BibTeX
@article{Mussa2026,
  author = {Mussa, Taif Ahmed},
  title = {Simulation of Corrugated Sheet Metal Forming and analysis of Its ‎Characteristics},
  journal = {Journal of University of Babylon for Engineering Sciences},
  year = {2026},
  volume = {34},
  number = {3},
  pages = {80--101},
  doi = {10.29196/jubes.v34i3.6732}
}
Kostenlos starten →