EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Microcontroller – Based Plotter Machine

Aman Ismail Nsayef, Anas Lateef Mahmood

Al-Nahrain Journal for Engineering Sciences · 2018

DOI: 10.29194/njes.21030350 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Al-Nahrain Journal for Engineering Sciences, 2018. Verfasst von Aman Ismail Nsayef und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The main idea behind this paper is to design and implement a cheap, smaller size, easily operable, easy interface and flexible 3-axis Computer Numerical Control (CNC) plotter machine. The lower cost is achieved by using 2 CD drives from old PC’s with their stepper motors as the main structure for the hardware. The two stepper motors already found in the CD drives used to control the pen movements onto X and Y axis and one servo motor on the Z axis. An Arduino Uno microcontroller is used to controls the proper synchronization of these three motors during printing/drawing process. The Arduino Uno is programmed with G-Code parser from PC that is connected to the Arduino via a USB cable to control the motors movement and synchronization. The plotter machine is implemented and tested by printed different images and texts on papers (8cm × 8cm) using a pen, the small size of the papers because of the small plotter size. The motors winding voltages were displayed on the oscilloscope during the printing process to investigate the synchronization between the three motors. The design of the circuit is simple, inexpensive and can be accomplished using commercially available components.

Zitieren

APA

Nsayef, A. I., & Mahmood, A. L. (2018). Microcontroller – Based Plotter Machine. Al-Nahrain Journal for Engineering Sciences. https://doi.org/10.29194/njes.21030350

Vancouver

Nsayef AI, Mahmood AL. Microcontroller – Based Plotter Machine. Al-Nahrain Journal for Engineering Sciences. 2018. doi:10.29194/njes.21030350

BibTeX
@article{Nsayef2018,
  author = {Nsayef, Aman Ismail and Mahmood, Anas Lateef},
  title = {Microcontroller – Based Plotter Machine},
  journal = {Al-Nahrain Journal for Engineering Sciences},
  year = {2018},
  doi = {10.29194/njes.21030350}
}
Kostenlos starten →