EUVIMEDEUVIMED entdecken
Crossref

Simulation-Based Optimization of Robotic Weld Seam Tracking Using Fuzzy C-Means Clustering and PID Control

Adem Dilbaz, İlker Ali Ozkan, Ziya Özçelik

Düzce Üniversitesi Bilim ve Teknoloji Dergisi · 30.10.2025 · 13 (4) · 1758-1781

DOI: 10.29130/dubited.1724335 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Düzce Üniversitesi Bilim ve Teknoloji Dergisi, online erschienen am 30.10.2025. Verfasst von Adem Dilbaz und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 46 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Today, welding automation is a vital technology that boosts efficiency in manufacturing processes while enhancing weld quality by minimizing human intervention. However, deformations caused by high heat and deviations from programming errors in robotic welding can negatively impact welding quality. Existing camera and laser-based seam tracking systems are insufficient in certain scenarios due to factors such as highly reflective surfaces, intense arc radiation, or uneven surface conditions. This article presents a weld seam tracking system based on an angle sensor, called Weld Guide, developed to address the limitations of existing systems. The proposed system features angle sensors that utilize a Contact-based sensor principle to improve the accuracy of the robotic welding torch. The Weld Guide system was designed using SolidWorks software, simulated in RoboDK simulation software, and validated through experimental tests. The prototype was tested on both linear and curved weld seams, and its performance under different control systems was evaluated using an optical microscope. Results from the experiments showed that the Weld Guide system successfully tracked weld seams with a deviation of less than 0.6 mm. The comparison between the trajectories obtained from simulated and actual field tests exhibited a similarity exceeding 97%, demonstrating a high level of accuracy in trajectory-tracking performance. Furthermore, a hybrid approach combining Fuzzy C-Means (FCM) clustering with Proportional Integral Derivative (PID) control was implemented to enable automatic tuning of the PID parameters. By incorporating oscillation levels into the fuzzy logic rules, the optimization was enhanced against sudden changes, thereby preventing error accumulation and excessive oscillations. These findings indicate that the proposed system provides a reliable and cost-effective alternative when optical-based tracking methods fall short.

Zitieren

APA

Dilbaz, A., Ozkan, İ. A., & Özçelik, Z. (2025). Simulation-Based Optimization of Robotic Weld Seam Tracking Using Fuzzy C-Means Clustering and PID Control. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 13(4), 1758-1781. https://doi.org/10.29130/dubited.1724335

Vancouver

Dilbaz A, Ozkan İA, Özçelik Z. Simulation-Based Optimization of Robotic Weld Seam Tracking Using Fuzzy C-Means Clustering and PID Control. Düzce Üniversitesi Bilim ve Teknoloji Dergisi. 2025;13(4):1758-1781. doi:10.29130/dubited.1724335

BibTeX
@article{Dilbaz2025,
  author = {Dilbaz, Adem and Ozkan, İlker Ali and Özçelik, Ziya},
  title = {Simulation-Based Optimization of Robotic Weld Seam Tracking Using Fuzzy C-Means Clustering and PID Control},
  journal = {Düzce Üniversitesi Bilim ve Teknoloji Dergisi},
  year = {2025},
  volume = {13},
  number = {4},
  pages = {1758--1781},
  doi = {10.29130/dubited.1724335}
}
Kostenlos starten →