Investigation of the Engineering Properties of Masonry Mortars Produced with Construction and Demolition Waste Aggregates Under Hydrochloric Acid Attack
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji · 17.11.2026 · (Advanced Online Publication)
DOI: 10.29109/gujsc.2048520 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, online erschienen am 17.11.2026. Verfasst von Hacer Gizem Hörmet und 2 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben.
Abstract (Originalsprache)
In this study, engineering properties of masonry mortars incorporating Construction and Demolition Waste (CDW) were comprehensively investigated. From mortars classified in accordance with TS 2510 standard two types cement-based and lime–cement-based were selected. Mortar specimens were fabricated with volumetric ratios of 4:1 (sand:cement) for cement-based series and 4:1:0.5 (sand:cement:lime) for lime–cement-based series. Aggregate obtained from river sand and construction and demolition waste was used as aggregate. The water/binder ratio in mortar samples was determined to be 0.8 and 0.7 in cement-based and lime–cement-based samples, respectively. In production of specimens, construction and demolition waste was used instead of river sand at 0%, 25%, 50%, 75%, and 100% by weight. A flow test was conducted to determine consistency of fresh masonry wall mortars. Water absorption, porosity, ultrasound transmission velocity, flexural and compressive strength tests were conducted on hardened mortar samples. To evaluate influence of acid exposure, specimens were exposed to a 28-day standard curing process, after which they were submerged in a hydrochloric acid solution with a concentration of 5% by weight. The changes in water absorption, porosity, flexural and compressive strength, weight loss of specimens kept in acid solution were investigated. The study results indicated that compressive strength of cement-based series was higher than that of lime–cement-based series. Increasing substitution rate of construction and demolition waste increased compressive strength of samples prepared with both types of binders. The incorporation of construction and demolition waste led to an improvement in workability of lime–cement-based series relative to cement-based series.
Zitieren
APA
Hörmet, H. G., Dündar, B., & Albayrak, M. (2026). Investigation of the Engineering Properties of Masonry Mortars Produced with Construction and Demolition Waste Aggregates Under Hydrochloric Acid Attack. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. https://doi.org/10.29109/gujsc.2048520
Vancouver
Hörmet HG, Dündar B, Albayrak M. Investigation of the Engineering Properties of Masonry Mortars Produced with Construction and Demolition Waste Aggregates Under Hydrochloric Acid Attack. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. 2026. doi:10.29109/gujsc.2048520
BibTeX
@article{Hrmet2026,
author = {Hörmet, Hacer Gizem and Dündar, Behcet and Albayrak, Meltem},
title = {Investigation of the Engineering Properties of Masonry Mortars Produced with Construction and Demolition Waste Aggregates Under Hydrochloric Acid Attack},
journal = {Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji},
year = {2026},
number = {Advanced Online Publication},
doi = {10.29109/gujsc.2048520}
}
EUVIMED