Numerical Investigation of the Effects of Different Cooling Methods on the Thermal Performance and Power Capacity of an Induction Motor for Light Electric Vehicles
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji · 16.11.2026 · (Advanced Online Publication)
DOI: 10.29109/gujsc.2036117 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, online erschienen am 16.11.2026. Verfasst von Burak Yenipınar. Die Arbeit nennt 30 Literaturangaben.
Abstract (Originalsprache)
The thermal performance and power capacity of traction motors used in light electric vehicles are significantly affected by the applied cooling method. In this study, based on the electromagnetic analysis model of a three-phase, 5 kW induction motor designed for light electric vehicles, the effects of different cooling methods on the motor's thermal behavior, permissible current density, and power capacity were investigated. The analyses were carried out in ANSYS Motor-CAD software under an ambient temperature of 40 °C and a winding temperature limit of 180 °C adopted for insulation class H. Three different configurations were evaluated: a naturally cooled, totally enclosed non-ventilated (TENV) configuration; a totally enclosed fan-cooled (TEFC) configuration; and a liquid-cooled configuration using a water–ethylene glycol mixture. Under the S2-60 min duty cycle, the permissible motor power was determined as 5850 W for the TENV configuration, 7800 W for the TEFC configuration, and 11100 W for the liquid-cooled configuration. These values correspond to increases of approximately 17%, 56%, and 122%, respectively, relative to the 5 kW rated power. Under continuous duty (S1), the permissible powers were obtained as 3200 W, 7050 W, and 10900 W for the same configurations, respectively. A comparison of the S1 and S2-60 min results showed that the effect of the duty cycle on power capacity was pronounced for the naturally cooled configuration, whereas it remained rather limited for the liquid-cooled configuration. The results indicate that, for the induction motor model examined, the cooling method is one of the key parameters governing the permissible current density and power capacity.
Zitieren
APA
Yenipınar, B. (2026). Numerical Investigation of the Effects of Different Cooling Methods on the Thermal Performance and Power Capacity of an Induction Motor for Light Electric Vehicles. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. https://doi.org/10.29109/gujsc.2036117
Vancouver
Yenipınar B. Numerical Investigation of the Effects of Different Cooling Methods on the Thermal Performance and Power Capacity of an Induction Motor for Light Electric Vehicles. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. 2026. doi:10.29109/gujsc.2036117
BibTeX
@article{Yenipnar2026,
author = {Yenipınar, Burak},
title = {Numerical Investigation of the Effects of Different Cooling Methods on the Thermal Performance and Power Capacity of an Induction Motor for Light Electric Vehicles},
journal = {Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji},
year = {2026},
number = {Advanced Online Publication},
doi = {10.29109/gujsc.2036117}
}
EUVIMED