Structural Design and Optimization of an Engine Pylon for a Special Design Unmanned Aircraft under Extreme Load Conditions
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji · 15.11.2026 · (Advanced Online Publication)
DOI: 10.29109/gujsc.1919765 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, online erschienen am 15.11.2026. Verfasst von Volkan Turuç und 1 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben.
Abstract (Originalsprache)
In this study, finite element and topology optimization methods were used to reduce the weight of the motor pylon of a fixed-wing unmanned aerial vehicle. First, the geometry created with maximum design volume was analyzed under the effects of thrust, inertial forces, and motor torque. A structural investigation was then conducted in the linear elastic region, based on the von Mises stress criterion. Topology optimization was applied with a minimum compliance target and a 60% volume reduction constraint. Based on the results, material in regions with low stresses was removed, and an efficient structure was obtained while preserving load-bearing regions. After optimization, the redesigned part was re-analyzed considering the production criteria and the same boundary conditions, and it was confirmed that structural safety was maintained. To more accurately determine the boundary conditions, it was shown that the inertial forces were derived from nonlinear aircraft mechanics equations. In addition, modal analyses revealed that the natural frequency of the part is higher than the operating frequency and that there is no risk of resonance. In addition to these studies, the redesigned geometry was fabricated and tested using additive manufacturing methods. The results obtained from numerical analyses and experimental investigations showed a high degree of agreement, providing strong validation, especially in terms of stress distributions.
Zitieren
APA
Turuç, V., & Yıldız, A. (2026). Structural Design and Optimization of an Engine Pylon for a Special Design Unmanned Aircraft under Extreme Load Conditions. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. https://doi.org/10.29109/gujsc.1919765
Vancouver
Turuç V, Yıldız A. Structural Design and Optimization of an Engine Pylon for a Special Design Unmanned Aircraft under Extreme Load Conditions. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. 2026. doi:10.29109/gujsc.1919765
BibTeX
@article{Turu2026,
author = {Turuç, Volkan and Yıldız, Ahmet},
title = {Structural Design and Optimization of an Engine Pylon for a Special Design Unmanned Aircraft under Extreme Load Conditions},
journal = {Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji},
year = {2026},
number = {Advanced Online Publication},
doi = {10.29109/gujsc.1919765}
}
EUVIMED