EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

The Effect of MES-Ethanol Formulation in Enhancing Surfactant Flooding Efficiency - A Laboratory Scale Perspective

Mulia Ginting, Muhammad Taufiq Fathaddin, Puri Wijayanti, Apriandi Rizkina Rangga Wastu, Zakia Azzahra, Eleonora Anselina Desi Letor, Ryan Gilberth De Fretes

Scientific Contributions Oil and Gas · 01.07.2026 · 49 (2) · 633-648

DOI: 10.29017/scog.v49i2.2096 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientific Contributions Oil and Gas, online erschienen am 01.07.2026. Verfasst von Mulia Ginting und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surfactant flooding is an Enhanced Oil Recovery (EOR) technique aimed at improving oil displacement efficiency by reducing the interfacial tension (IFT) between oil and water. This study investigates the performance of palm oil–based Methyl Ester Sulfonate (MES) surfactant combined with 96% ethanol as a co-surfactant for EOR applications. The surfactant formulations were prepared at MES concentrations ranging from 0.5% to 2.0% and evaluated through density, viscosity, aqueous stability, phase behavior, interfacial tension, and coreflooding experiments. The aqueous stability test showed that all formulations remained clear without precipitation, indicating good thermal stability. Viscosity measurements showed that solution viscosity increased with higher surfactant concentrations but consistently declined as the temperature rose from 30 °C to 60 °C. Phase behavior analysis demonstrated that ethanol enabled the formation of emulsions at all concentrations, with middle-phase microemulsions observed at MES concentrations of 1.25% and 1.5%. The largest middle-phase emulsion volume of 3.00% was obtained at 1.25% MES, indicating the optimal formulation. Interfacial tension measurements showed a reduction to 0.521 mN/m, confirming the effectiveness of the co-surfactant in lowering IFT. Coreflooding results indicated that surfactant injection yielded an incremental oil recovery factor of 29.24% over conventional waterflooding, achieving a total cumulative recovery factor of 45.90%.

Zitieren

APA

Ginting, M., Fathaddin, M. T., Wijayanti, P., Wastu, A. R. R., Azzahra, Z., Letor, E. A. D., & Fretes, R. G. D. (2026). The Effect of MES-Ethanol Formulation in Enhancing Surfactant Flooding Efficiency - A Laboratory Scale Perspective. Scientific Contributions Oil and Gas, 49(2), 633-648. https://doi.org/10.29017/scog.v49i2.2096

Vancouver

Ginting M, Fathaddin MT, Wijayanti P, Wastu ARR, Azzahra Z, Letor EAD, et al. The Effect of MES-Ethanol Formulation in Enhancing Surfactant Flooding Efficiency - A Laboratory Scale Perspective. Scientific Contributions Oil and Gas. 2026;49(2):633-648. doi:10.29017/scog.v49i2.2096

BibTeX
@article{Ginting2026,
  author = {Ginting, Mulia and Fathaddin, Muhammad Taufiq and Wijayanti, Puri and Wastu, Apriandi Rizkina Rangga and Azzahra, Zakia and Letor, Eleonora Anselina Desi and Fretes, Ryan Gilberth De},
  title = {The Effect of MES-Ethanol Formulation in Enhancing Surfactant Flooding Efficiency - A Laboratory Scale Perspective},
  journal = {Scientific Contributions Oil and Gas},
  year = {2026},
  volume = {49},
  number = {2},
  pages = {633--648},
  doi = {10.29017/scog.v49i2.2096}
}
Kostenlos starten →