EUVIMEDEUVIMED entdecken
Crossref

Implementation of a Lightweight and Portable Horn Antenna Using 3-D Printing Technology

Serhan Yamaçlı

Journal of Advanced Research in Natural and Applied Sciences · 2022

DOI: 10.28979/jarnas.1039348 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Research in Natural and Applied Sciences, 2022. Verfasst von Serhan Yamaçlı. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a horn antenna operating at 5.8GHz centre frequency, which is an ISM operating frequency, is de-signed and manufactured. The novelty of the antenna is that it is produced using a 3D printer with a conductive filament containing carbon nanotube particles. The geometric dimensions of the antenna were calculated by means of an antenna design software. Then, the size of the radiating element of the antenna was optimized to set the centre frequency to 5.8GHz. It has been verified by electromagnetic simulations that the designed antenna exhibits this centre frequency. Then, the designed antenna geometry was sketched in a 3-dimensional drawing program and made ready for printing. This antenna was fabricated on an Ultimaker 3D printer with a PLA fila-ment containing conductive carbon nanotubes. The radiation element of the antenna and the SMA connector were finally attached to the printed antenna. The frequency response of the antenna is then measured using a vector network analyser and it has been shown that the produced pyramidal horn antenna works in the desired frequency band. The printed antenna has the desired frequency characteristic without the need for any additional coating or conductive spray thanks to the PLA filament containing conductive carbon nanotubes. The produced antenna has a weight of only 64.53 grams, including the SMA connector and the radiation element. The proposed lightweight and practical horn antenna design concept may have important applications considering the advances and needs of mobile defence and telecommunication systems.

Zitieren

APA

Yamaçlı, S. (2022). Implementation of a Lightweight and Portable Horn Antenna Using 3-D Printing Technology. Journal of Advanced Research in Natural and Applied Sciences. https://doi.org/10.28979/jarnas.1039348

Vancouver

Yamaçlı S. Implementation of a Lightweight and Portable Horn Antenna Using 3-D Printing Technology. Journal of Advanced Research in Natural and Applied Sciences. 2022. doi:10.28979/jarnas.1039348

BibTeX
@article{Yamal2022,
  author = {Yamaçlı, Serhan},
  title = {Implementation of a Lightweight and Portable Horn Antenna Using 3-D Printing Technology},
  journal = {Journal of Advanced Research in Natural and Applied Sciences},
  year = {2022},
  doi = {10.28979/jarnas.1039348}
}
Kostenlos starten →